Novel predictive methodology of amorphisation of gas-atomised Fe-Si-B alloy powders

Alvarez, Kenny L.; Baghbaderani, Hasan Ahmadian; Martín, José Manuel Perlado; Burgos, N.; McCloskey, Paul; González, J.; Masood, Ansar

doi:10.1016/j.jnoncrysol.2021.121151

Cited by 8 publications

(2 citation statements)

References 47 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…1−5 Non-crystalline or amorphous materials have unique properties that make them attractive for use in SMCs. 6,7 Amorphous SMCs (ASMCs) have received significant attention due to their high saturation induction, low eddy current losses, and excellent frequency-dependent magnetic properties. 8,9 Research on ASMCs has mainly focused on the preparation of ASMCs, the characterization of their microstructure, and their magnetic properties.…”

Section: ■ Introductionmentioning

confidence: 99%

“…Soft magnetic composites (SMCs) are widely used in a variety of electromagnetic applications due to their superior magnetic properties, including high permeability and low coercivity. − Non-crystalline or amorphous materials have unique properties that make them attractive for use in SMCs. , Amorphous SMCs (ASMCs) have received significant attention due to their high saturation induction, low eddy current losses, and excellent frequency-dependent magnetic properties. , Research on ASMCs has mainly focused on the preparation of ASMCs, the characterization of their microstructure, and their magnetic properties. − Various preparation methods have been proposed, such as powder metallurgy, hot pressing, spark plasma sintering, and additive manufacturing. − Among these methods, powder metallurgy is the most widely used technique. , Researchers have explored the effects of different preparation parameters on the microstructure and magnetic properties of ASMCs, including particle size, compaction pressure, annealing temperature, and cooling rate. − These parameters can significantly affect the magnetic properties of ASMCs, such as permeability, coercivity, power loss, and saturation induction.…”

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

Magnetic Properties of High DC Bias Performance Fe-Si-B-C-Cr Amorphous Soft Magnetic Composites

Shen,

Wang,

Liu

et al. 2023

ACS Appl. Electron. Mater.

View full text Add to dashboard Cite

The present study investigates three types of Fe-Si-B-C-Cr non-crystalline magnetic powder and their effects on the magnetic properties of soft magnetic composites. Specifically, the study examines the impact of heat treatment temperature and particle size distribution. The results indicate a positive correlation between the size of the magnetic powder particles and saturation magnetization. Changes in heat treatment temperature similarly affected the magnetic properties of the three soft magnetic composites, with the optimal temperature for heat treatment determined to be 460 °C. Nonlinear fitting was used to separate the total loss, and it was found that non-crystalline soft magnetic composites made with small-sized magnetic powder exhibited lower eddy current loss under MHz magnetic field conditions. The relaxation phenomenon observed in the hysteresis loop with increasing frequency under a dynamic magnetic field explains the mechanism of power loss variation in soft magnetic composite materials with respect to magnetic field frequency and magnetic induction intensity. A high-performance non-crystalline soft magnetic composite with a power consumption of 372 kW/m3 was obtained at a magnetic induction intensity of 20 mT and a frequency of 1 MHz. Which demonstrated excellent stability under MHz magnetic field conditions as well as excellent DC bias characteristics, with a relative permeability above 90% under a DC bias magnetic field of 7.96 kA/m.

show abstract