Novel Preparation Technology of SBS Modified Asphalt

Abstract

Colloid mill or high-speed shearing mechanical is used in traditional preparation technology of SBS modified asphalt for the dispersion of SBS in matrix asphalt, which leads to the high equipment cost in production of SBS modified asphalt. The fractions oil of FCC slurry oil distillation with a high content of aromatics is a good swelling agent of SBS. The FCC distillation residual (FR) with high softening point can resolve the problem that penetration increased when the addition of swelling agent increased. SBS is pre-swelled by the heavier fractions from FCC slurry oil, and then it will be dispersed in the vacuum residuum (VR) by simple mechanical stirring to prepare SBS modified asphalt due to the perfect swelling effects in this work. The influences of different materials, distillation yield and ratio of FR to VR on the performance of SBS modified asphalt have been investigated. Fluorescence microscopy was applied to observe the different disperse images of SBS modified asphalt prepared by simple mechanical stirring and high speed shearing. The results indicated that the novel method can be used to prepare SBS modified asphalt with good performance and storage stability.

Comparative study of typical asphalt binders in Xinjiang region modified with warm mix additives

“…Consequently, exceptional performance was exhibited in low temperatures, resistance to aging, and fatigue. Nevertheless, KLMY's unique composition, notably its limited compatibility with commonly employed modifiers, especially high-molecular-weight polymer modifiers, presents challenges in preparing modified asphalt (Yu et al, 2018;Yu et al, 2019). In contrast, TH another petroleum asphalt variety produced in Xinjiang, diverged from KLMY.…”