Numerical analysis of high-lift configurations with oscillating flaps

Abstract

This study presents two-dimensional aerodynamic investigations of various high-lift configuration settings concerning the deflection angles of droop nose, spoiler and flap in the context of enhancing the high-lift performance by dynamic flap movement. The investigations highlight the impact of a periodically oscillating trailing edge flap on lift, drag and flow separation of the high-lift configuration by numerical simulations. The computations are conducted with regard to the variation of the parameters reduced frequency and the position of the rotational axis. The numerical flow simulations are conducted on a block-structured grid using Reynolds Averaged Navier Stokes simulations employing the shear stress transport $$k-\omega $$ k - ω turbulence model. The feature Dynamic Mesh Motion implements the motion of the oscillating flap. Regarding low-speed wind tunnel testing for a Reynolds number of $$0.5 \times 10^{6}$$ 0.5 × 10 6 the flap movement around a dropped hinge point, which is located outside the flap, offers benefits with regard to additional lift and delayed flow separation at the flap compared to a flap movement around a hinge point, which is located at 15 % of the flap chord length. Flow separation can be suppressed beyond the maximum static flap deflection angle. By means of an oscillating flap around the dropped hinge point, it is possible to reattach a separated flow at the flap and to keep it attached further on. For a Reynolds number of $$20 \times 10^6$$ 20 × 10 6 , reflecting full scale flight conditions, additional lift is generated for both rotational axis positions.

Numerical Simulation Using Slats, Slots, and Flaps in Steady Flight Conditions

“…This causes multi-element high lift devices to be a very interesting topic in current research. Researchers who have used multi-element high lift devices include Jawahar [8], Shmilovich [9], Chen [10], Ruhland [11], Srivastava [12], dan Lima [13].…”

“…Ruhland [11] researched on 2-dimensional objects in a combination of a droop nose, spoiler, and a trailing-edge flap. The combinations studied included drop nose deflection 0•, 15 and Re = 0.5 × 10 6 .…”