Numerical analysis of semi-elliptical hollow section columns

Abstract

Structures and BuildingsVolume 166 Issue SB8 Numerical analysis of semi-elliptical hollow section columns Silvestre, Pires and DuarteThe buckling behaviour, ultimate strength and failure of columns with semi-elliptical hollow section are examined in this paper, using finite-strip analyses and shell finite-element analyses. Semi-elliptical hollow sections are a unique case of section shape, since they possess a flat part (plate behaviour) and a semi-elliptical part (shell behaviour).Assessing the contribution of each part to the buckling and ultimate behaviour of semi-elliptical hollow section columns is the main objective of this paper. The buckling behaviour is first analysed using finite-strip software and the ultimate behaviour is then studied using shell finite-element software. From the finite-strip results it is shown that local buckling of semi-elliptical hollow section columns is solely governed by the instability of the flat part. From shell finite-element results it is shown that the ultimate behaviour is mostly governed by the pre-buckling stiffness of the semi-elliptical part. Some columns have ultimate loads well above the critical load (associated with local plate buckling) due to the stiffness of the semi-elliptical part, for which the buckling stress is much higher than that of flat part. Finally, some preliminary design guidance is proposed. An expression to predict the ultimate strength is presented and shown to provide accurate results.

Optimizing the Nonlinear Response of Elliptical Tubular Composite Beams Using SVM

“…Steel hollow sections are traditionally available in square (SHS), rectangular (RHS), and circular (CHS) configurations. The hollow section market has grown since the turn of the twenty-first century, with building steelwork experiencing a high demand for elliptical hollow sections (EHSs EHS tubes now offer an intriguing and fashionable answer for a variety of obvious uses in steel building [2]. Unfortunately, there isn't much data available to support the safe and cost-effective design of EHS components in structures, which could prevent their widespread use.…”

Cold‐formed steel T‐joints with semi‐oval hollow section chord: Experimental insight and finite element modelling

“…Steel tubular members have gained increasing popularities in skyscrapers, truss bridges, large span spatial structures and offshore platforms. Owing to the recent advancement of steel manufacturing technology, new types of crosssection profiles with better structural and architectural performance can be easily fabricated, such as roundended oval [1,2], semi-elliptical [3], hexagonal [4], octagonal [5,6] and elliptical hollow section [7][8][9][10][11][12][13][14]. The semi-oval hollow section (SOHS), consisting of one semicircular and three flat faces, is one of the newly emerged tubular sections with a vast of structural and architectural merits.…”