Numerical Analysis of Tar and Syngas Formation during the Steam Gasification of Biomass in a Fluidized Bed

Abstract

A sequential modular hydrodynamic model integrated with detailed reaction kinetics (SMHM-RK) was developed and validated to predict tar and syngas components produced by the steam gasification of biomass in a fluidized bed gasifier. The simulations showed that the prediction accuracy is sensitive to both models for hydrodynamics and reaction kinetics. The simulations showed that the tar composition predicted by the SMHM-RK was more close to the measured values than those predicted by the well-mixed hydrodynamic model integrated with the same reaction kinetics (WMHM-RK). The predictions showed that the total tar decreased, but the polycyclic aromatic tar compounds increased with the increase in gasification temperature. There was an optimum steam-to-biomass ratio (SBR) for minimizing tar formation. The simulations found that the contents of total tar and heavy tar compounds decreased by increasing the SBR from 0.3 to 0.9, and then increased by further increasing the SBR. The injection of a small amount of oxygen in steam gasification cannot reduce tar formation. The injection of oxygen in steam gasification changed the reaction pathways of naphthalene to produce more naphthalene in the syngas. The de-volatilization rate affects pyrolytic volatile compositions and subsequent tar formation. Therefore, biomass devolatilization and homogeneous gas reactions should be solved simultaneously to accurately predict the syngas and tar composition.

The Effects of Syngas Composition on Engine Thermal Balance in a Biomass Powered CHP Unit: A 3D CFD Study

“…Energy valorization of organic waste materials is today of high interest as an example of the concept of "circular economy" for power generation purposes [1]. Between renewables, biomass is expected to preserve its position for decades to come, although today over 35% of the biomass is destinated to traditional cooking methods instead of power generation [2].…”