Numerical Design of Tubesheet Structure Based on Finite Element Analysis

Abstract

In this paper, finite element analysis models were established to simulate a tubesheet connected with tubes by expanding or welding method. Stresses and deformations in the tubesheet produced by pressure load were calculated with emphasis on the effect of the tubes support. Results showed that the deflections and stresses at the un-perforated zone are greatly affected by the radius of the perforated circle for a partly perforated tubesheet, but they are not sensitive to the radius of the tubesheet when it is fully supported by tubes. If applying numerical design for heat exchangers based on finite element analysis, the tubesheet thickness could be significantly reduced. Compared with the welding connection, expanding connection of the tubes and tubesheet is more helpful to raise the strength and stiffness of the perforated tubesheet.