Numerical investigation on combustion and NO_x emissions of a CH₄ / kerosene afterburner

Abstract

Cogeneration groups equipped with gas turbines usually operate with natural gas. The new requirements regarding the flexibility of functioning both with conventional and alternative fuels have led to the development of new solutions. An afterburning installation facilities, on the one hand, the combustion of fuels which can not normally be used in gas turbines, and on the other hand, allows a rapid adaptation of the cogeneration group to the user's variable thermal energy requirements. In some cases, an afterburning installation may contribute to the reduction of NOx emissions. It also increases the group's adaptability to changing environmental conditions, especially during the summer. Having in mind these tendencies and starting from the data collected from the 2xST 18 – Suplacu de Barcau cogeneration plant, this paper presents a numerical analysis of an afterburner in order to switch from natural gas to natural gas / kerosene functioning, with minimal modifications to the existing solution. A 3D steady RANS numerical integration of the Navier-Stokes equations has been carried out using the commercial software ANSYS CFX. For future research work, it will be taken into consideration the use of more complex reaction mechanisms and the variation of the spray angle will be considered. Also, in order to validate the CFD results a combustion experiments campaign will be conducted.