Numerical Simulation and Design of All-Thin-Film Homojunction Perovskite/c-Si Tandem Solar Cells

Abstract

Double-junction solar devices featuring wide-bandgap and narrow-bandgap sub-cells are capable of boosting performance and efficiency compared to single-junction photovoltaic (PV) technologies. To achieve the best performance of a double-junction device, careful selection and optimization of each sub-cell is crucial. This work presents the investigation of an all-thin-film two-terminal (2T) monolithic homojunction perovskite (PVK)/c-Si tandem cell using Silvaco TCAD simulation. The front sub-cell utilizes homojunction PVK that has a bandgap of 1.72 eV, whereas the rear sub-cell uses thin c-Si with a bandgap of 1.12 eV. Both cells are connected via a p++/n++ silicon tunnel diode. Experimental calibration of the heterojunction PVK and c-Si cells yields power conversion efficiencies (PCE) of 18.106% and 17.416%, respectively. When integrated into an initial PVK/c-Si tandem, the resulting cell achieves a PCE of 29.38%. To compare the performance, the heterojunction PVK layer is replaced with an n-p homojunction PVK layer, revealing the impact of the absence of a surplus built-in electric field in the perovskite film as a strong limiting factor. Further, a thorough investigation of four distinct structures for the n-p homojunction PVK cell is conducted. The four structures include a complete cell, electron transport layer (ETL)-free, hole transport layer (HTL)-free, and carrier transport layer (CTL)-free structures. The results show that the CTL-free structure has significant potential after applying certain optimization techniques that result in reducing surface recombination, enhancing the built-in electric field, and improving light absorption. With the current-matching condition achieved, the tandem efficiency reaches 36.37%.

TCAD-Based Design and Optimization of Flexible Organic/Si Tandem Solar Cells

“…The physical models implemented in Atlas have been validated through extensive experiments for single and tandem solar cells [42][43][44]. The calculated results presented in this study are supported by experimental data.…”