On Geometrical Characteristics of WC-Co Round Cavities After ED-Machining with Different Grades of CuW Electrodes

Abstract

Cemented carbides (WC-Co) are difficult to be processed by conventional machining processes. Electrical discharge machining (EDM) appears as an efficient technology to manufacture WC-Co products with high accuracy. In EDM literature no research works investigating the influences of different grades of CuW electrodes on geometrical characteristics when ED-machining the same cemented carbide was found. This work presents an investigation on ED-Machining of cemented carbide (WC-Co) with 10% Co using two grades of coper-tungsten (CuW) electrodes with 65% and 85% of tungsten. ED-Machining experiments were carried out under rough, semifinish and finish regimes with input variables discharge current i e , discharge duration t e and pulse interval time t o using analysis of variance (ANOVA) based on design of experiments with complete factorial 3 2. Output variables evaluated were WC-Co workpiece geometrical characteristics 3D surface roughness and round cavities circularity measures. Results showed that ED-Machining regime is the most significant parameter on both WC-Co workpiece circularity and surface roughness measures. Electrodes grades CuW65 and CuW85 presented similar results on workpiece circularity and 3D surface roughness.

Water-in-sunflower seed oil emulsion as a dielectric fluid for micro electrical discharge machining (µEDM)

“…As consequence, more debris accumulate in the working gap. It then cause the increase in circularity deviation, due to the occurrence of more sparks where the debris concentration are higher, which explain the dielectric breakdown easily occurs [45]. These results corroborate the findings of the previous work which found at higher peak currents, circularity increases, due to higher discharge energy which leads to bigger craters sizes [46].…”

Experimental Investigations on µED Milling of Inconel 718 with Nano SiC Abrasive Mixed Dielectric

“…Electrical discharge machining is one of the nontraditional machining processes adopted by the industries for machining hard conductive materials [1][2][3] . The control of spark energy becomes a critical factor that affects the material removal process and surface topographywhen the EDM process is used for the creation of micro features.…”