On-line Monitoring and Data Analysis of Environmental Vibration of High Concrete Dam

Abstract

As we all know, our country has actually gradually developed into a country with frequent occurrence of global earthquakes. The global earthquakes in the southwest region are the most serious. The most severe earthquake occurred in parts of the southwest. In short, the seismic performance design of a high dam is reflected under the action of the high dam for a given amount of seismic motion and input load. At present, one of the main technical methods for studying high dam seismic engineering is to use model calculations and experiments on its structural dynamics. Moreover, the earliest dam prototype dynamic experiments in my country only occurred in the 1970s and 1980s, and few people in China conducted experiments on these dams. Although there were already a certain degree of practical results at that time, a batch of valuable materials was obtained. However, no matter from the perspective of safety or the actual effect on vibration, as well as the prototype dynamic measurement and test method of the above-mentioned main dam, it has not been well applied to the current expressway. Therefore, it is necessary to consider finding an alternative original kinetic test method. The purpose of this article is to in-depth study the data analysis and application of the online monitoring system of environmental vibration of reinforced concrete high dams in my country. A new online monitoring system for dam environmental vibration is carried out for simulation experiments. Experimental research shows that the noise frequency of the three detection points of environmental noise and vibration monitoring is basically controlled between 1.5~2.0 hz, while the noise frequency of the detection point of the symmetrical location is relatively close.