On the issue of applying the dynamic thermal rating in electric power distribution system

Abstract

The article considers separate studies and review articles on dynamic thermal rating system in power transmission lines and electrical equipment. Available researches of foreign authors are mainly devoted to forecasting algorithms, model-ing methodologies and implementation of dynamic thermal rating in order to increase the capacity of power transmis-sion lines. It is shown that for the tasks of planning and management of the electric power system in Russia, the need to study and coordinate domestic and foreign developments on the assessment of the capacity of power transmission lines and power distribution is currently relevant. The expansion of residential areas increases the load on electric distribution network due to the shift of maximum power consumption. The currently dynamically changing conditions of electricity consumption direct attention to the development of new technological concepts and the applicability of the existing approaches to assessing the capacity of electricity transmission lines to distribution networks. Available research on dynamic thermal rating in electric distribution networks has focused much attention on both the potential problems and benefits of its implementation in the integration of distributed generation based on the renewable energy sources, in particular wind generation. The ambiguous impact of dynamic thermal rating systems on the reliability of the electric distribution network and the need for their reasonable use, as well as a significant lack of research in relation to cable distribution networks and consistency in assessing their capacity depending on the cable insulation material are being not-ed. Few studies have verified the adaptation of the state-of-the-art approach of dynamic thermal rating of overhead transmission lines to cable lines for predicting parameters corresponding to operational objectives. The research results can be useful in the development and modernization of metering systems, in which new functions of power loss moni-toring and automated determination of distribution network reliability indicators are implemented, which will allow, within the framework of “smart grids”, to ensure the required level of reliability of power supply to consumers.