Online estimation and monitoring of local permeability in resin transfer molding

Abstract

Resin transfer molding (RTM) is a popular manufacturing method of composite materials, which have been widely used in many areas including aeronautic, automotive industries, etc. In RTM, permeability of fiber reinforcement varies with its geometric formation and affects the property of resin flow, which influences the final product quality. Therefore, effective estimation of permeability is crucial to achieving good process control and satisfactory quality product. In this article, a method of online estimating and monitoring local permeability is proposed. It can deal with variation in local permeability within preform caused by irregular arrangement of fibers among different regions. This study is divided into three stages. In the first stage, flow visualization was realized and all hardware was integrated to acquire real‐time information in resin filling period. In the second stage, local pressure and flow front location were substituted into the Darcy's law, thus making online calculation of local permeability feasible. Then, in the third stage, the statistical process control charting technique was adopted to identify the changes in permeability. The proposed methods were used in trial RTM tests to compare their results to those from the reference method and to confirm their effectiveness. POLYM. COMPOS. 37:1249–1258, 2016. © 2014 Society of Plastics Engineers

Improved non-destructive testing of carbon fiber reinforced polymer (CFRP) composites using pulsed thermograph

“…For illustrating the effectiveness of the proposed method, a CFRP specimen (12 cm  9.5 cm) was produced by a vacuum assisted resin transfer molding (VARTM) process [18]. The specimen consisted of thermosetting resin and multiple layers of carbon fiber sheets with the thickness of each sheet being 0.26 cm.…”

Numerical optimisation of thermoset composites manufacturing processes: A review

“…A stochastic multi objective optimisation has been applied to identify robust Pareto sets containing optimal cure cycle designs able to reduce cure time and maximum overshoot temperature by 40% compared to standard solutions whilst reducing variability by about 20% [122]. injection pressure [125]. Surrogate model based optimisations have been implemented to solve the draping problem [126] and to allow robust optimisation of the cure process [122].…”

Defect detection in CFRP structures using pulsed thermographic data enhanced by penalized least squares methods

“…In the experiment, the CFRP specimen with size of 12 cm  9.5 cm was manufactured by vacuum assisted resin transfer molding (VARTM) technique [30], which was strengthened with multiple layers of carbon fiber sheets. The thickness of each fiber sheet was 0.26 cm.…”