Operation of Inductive Charging Systems Under Misalignment Conditions: A Review for Electric Vehicles

Abstract

Inductive power transfer (IPT) for Electric Vehicles (EVs) is an emerging technology that can transfer power wirelessly over certain distances, thus offering some remarkable characteristics in terms of flexibility, position and movability. The output power of an IPT system depends on the coupling factor of the magnetic couplers which can deviates from the nominal operating conditions due to occurrence of misalignment. Nevertheless, misalignment of the magnetic couplers in inductive charging is inevitable, and it usually results in the variation of the mutual inductance and output power of the system with corresponding decrease in the system overall efficiency. So far, the literature has reported various techniques for achieving designs with higher misalignment tolerance. The reported techniques can be mainly classified into three categories, as viewed from the following aspects: magnetic couplers layouts, compensation networks and control strategy. Each of these techniques has its pros and cons in terms of implementation cost, system layout, efficiency, power density and reliability depending on the application. With the increased investigation of more applications of IPT, new modified techniques of improving the misalignment tolerance in the IPT system are continuously being proposed based on permutations and combinations of the existing ones; thus causing some confusion and difficulties for researchers and system vendors to follow. This paper, therefore, aims to provide a comprehensive review of the existing methods for IPT systems that address the misalignment issue in EVs wireless charging. A review of the IPT system is presented and an investigation of the numerous factors affecting the output power and performances of the system when the coils are not aligned. In addition, the advantages and disadvantages of each technique on the IPT system's performance are analyzed in detail.

Simultaneous Wireless Power and Data Transfer for Electric Vehicle Charging: A Review

“…As a different specific case study, the use of data transmission between both parts of the circuit is proposed to carry out the synchronisation between the primary and secondary power converters [75], [76]. In WPT systems where control over the converters on both sides is implemented [77], it is of substantial importance to synchronise the signals that activate the power converters. This is mandatory to control the power flows in Vehicle to Grid (V2G) operations based on a phasedelay technique [78].…”

Optimized Design of a Wireless Charger Prototype for an e-Scooter

“…The lower the complexity, the lower the cost. Some complex geometries are proposed in the related literature for wireless chargers when some factors (such as misalignment) are present [20]. However, these particularities are not present in our application and simple coil geometries provide a similar performance than complex and more expensive coils.…”

A Maximum Transfer Efficiency Tracking Method for Dynamic Wireless Charging Systems of Electric Vehicles

“…While the latter is not the focus of this paper, it is worth noting that a rich research community is on it. Their recent works have been summarized in [4].…”