Optical hydrogen sensing with high-Q guided-mode resonance of Al2O3/WO3/Pd nanostructure

Abstract

Nanostructure based on a dielectric grating (Al2O3), gasochromic oxide (WO3) and catalyst (Pd) is proposed as a hydrogen sensor working at the room temperature. In the fabricated structure, the Pd catalyst film was as thin as 1 nm that allowed a significant decrease in the optical absorption. A high-Q guided-mode resonance was observed in a transmission spectrum at normal incidence and was utilized for hydrogen detection. The spectra were measured at 0–0.12% of hydrogen in a synthetic air (≈ 80% $${\text{N}}_{2}$$ N 2 and 20% $${\text{O}}_{2}$$ O 2 ). The detection limit below 100 ppm of hydrogen was demonstrated. Hydrogen was detected in the presence of oxygen, which provides the sensor recovery but suppresses the sensor response. Sensor response was treated by the principal component analysis (PCA), which effectively performs noise averaging. Influence of temperature and humidity was measured and processed by PCA, and elimination of the humidity and temperature effects was performed. Square root dependence of the sensor response on the hydrogen concentration (Sievert’s law) was observed. Sensor calibration curve was built, and the sensor resolution of 40 ppm was found. Long term stability of the sensor was investigated. Particularly, it was shown that the sensor retains its functionality after 6 months and dozens of acts of response to gas.

Permeable diffractive optical elements for real-time sensing of running fluids

“…Optical sensing of materials is also a quite vast area where the optical radiation interacts with the analyte to generate a change in some properties of light. [15][16][17][18] The excitation of plasmonic resonances at the interface of Figure 1. Graphical layout of a device that includes a photon sieve as a permeable DOE.…”

Noise Tolerant Photonic Bowtie Grating Environmental Sensor

“…Photonic refractive index sensors are well established as a choice technology for the instantaneous, label-free, contactless, and highly sensitive characterization of many technologically relevant analytes. There is high demand for such sensors in the biological, chemical, environmental, defense, transport, and food industries, both for the detection of specific targets and also in the area of process control. − Refractive index sensors typically employ the overlap of the evanescent tail of a guided mode with the analyte to detect small changes, either with or without a binder molecule attached to the surface for increased specificity. , The implementation of such sensors in a real industrial environment is limited, however, by their sensitivity to other external influences such as mechanical vibrations and temperature variations; these external influences generate significant noise, which may easily screen the desired signal(s). For example, mechanical vibrations often limit the use of sensors to vibration-free environments, − which are impractical for applications in the field such as in industrial plants.…”