Optimal Reactive Power Compensation in Distribution Networks with Radial and Meshed Structures Using D-STATCOMs: A Mixed-Integer Convex Approach

Abstract

This paper deals with the problem regarding the optimal siting and sizing of distribution static compensators (D-STATCOMs) in electrical distribution networks to minimize the expected total annual operating costs. These costs are associated with the investments made in D-STATCOMs and expected energy losses costs. To represent the electrical behavior of the distribution networks, a power flow formulation is used which includes voltages, currents, and power as variables via incidence matrix representation. This formulation generates a mixed-integer nonlinear programming (MINLP) model that accurately represents the studied problem. However, in light of the complexities involved in solving this MINLP model efficiently, this research proposes a mixed-integer convex reformulation. Numerical results regarding the final annual operating costs of the network demonstrate that the proposed mixed-integer convex model is efficient for selecting and locating D-STATCOMs in distribution networks, with the main advantage that it is applicable to radial and meshed distribution grid configurations. A comparative analysis with respect to metaheuristic optimizers and convex approximations confirms the robustness of the proposed formulation. All numerical validations were conducted in the MATLAB programming environment with our own scripts (in the case of metaheuristics) and the CVX convex disciplined tool via the Gurobi solver. In addition, the exact MINLP model is solved using the GAMS software.

Optimal Reactive Power Dispatch in ADNs using DRL and the Impact of Its Various Settings and Environmental Changes

“…The proposed DQN-ORPD approach is compared with recent works aimed at solving the ORPD. The work in paper [ 56 ] applied mixed integer convex nonlinear programming (MIC-NLP) methodology, while in paper [ 57 ], the salp swarm algorithm (SSA) was employed to minimize active power loss. In addition, the genetic algorithm (GA) and the soft-actor-critic RL algorithm are investigated.…”

A Literature Review on the Optimal Placement of Static Synchronous Compensator (STATCOM) in Distribution Networks

“…In [128], a mixed-integer convex method has been proposed to reduce the annual operating cost of the network by optimally placing dSTATCOMs. The fitness function includes the annual energy loss cost of dSTATCOM placement, which is a convex function due to the resistances of distribution lines, and other investment costs can be approximated to the convex component due to the smaller sizes of dSTATCOM.…”

Optimal feeder routing and phase balancing for an unbalanced distribution system: a case study in Cambodia

“…For reducing the annual operating costs of the systems, the authors in [16]- [19] use a master-slave optimization approach with a modified sine-cosine, hurricane-based optimization algorithm (HOA) and slap swarm algorithm (SSA) used by the master stage helped it determine the best three-phase transformer connection and they used a threephase load flow that was based on triangles for the sleeve stage. In order to reduce the sum of the square currents passing in the line multiplied by the line's average resistance in a three-phase network, the mixedinteger quadratic convex (MIQC) approach was presented in [20]- [22]. The study in [20], [21] developed the MIQC model and tested it with several IEEE test systems, and compared the simulation result with metaheuristic solvers such as GA, black hole, and sine cosine.…”