Optimized Design and Test of Geometrically Nonlinear Static Aeroelasticity Model for High-Speed High-Aspect-Ratio Wing

Abstract

Large transport aircraft tend to adopt a wing layout with a high aspect ratio and swept-back angle due to the requirement of a high lift-to-drag ratio. Composite material is typically employed to ensure the light weight of the structure, causing serious static aeroelasticity problems to the aircraft. When the airplane is flying in the transonic region, its aerodynamic load is very complex, and the large load leads to large deformation of the wing, triggering geometric nonlinear effects, which further affects the static aerodynamic elasticity characteristics of the wing. In this study, in order to study the static aeroelastic characteristics of the transonic flow of a high-aspect-ratio airfoil, a new design method of the scaled similar optimization model is described, and the change in the model lift coefficient due to geometrically nonlinear static aeroelasticity effects when the angle of attack is changed was investigated by using simulation and wind tunnel test methods. In order to ensure the accuracy of the wing shape when the model was deformed greatly, this study employed the structural design scheme of the wing with the skin as the main stiffness component, and the thicknesses of different regions of the skin were used as the design variables for the stiffness optimization design. The engineering algorithm of nonlinear finite elements was used in this study to calculate the curve of lift with the angle of attack considering the geometric nonlinear static aeroelasticity effect. The results show that the similarity optimization process employed in this study can be used to complete the design of the high-speed aerostatic wing test model, and the wind tunnel test results show that geometric nonlinearity has a large impact on the lift coefficient of the wing.