Organomontmorillonite/graphene-PLA/PCL nanofilled blends: New strategy to enhance the functional properties of PLA/PCL blend

In this study, the effects of processing conditions through different mixing sequences were used to analyze the factors, which could influence the hybrid filler selective localization in an immiscible polymer blend and how localization can influence the rheological and thermal properties. Different selective localizations were observed depending on the mixing sequence used when the hybrid filler was added. Notably, nanoparticles can interact with each other, which favor a synergy between them and alters, besides the localization, the dispersion state, or can interact with one polymer phase, and also alter the nanoparticles' selective localization. An improvement in rheological properties was observed in the hybrid nanocomposite in which there was interaction between the nanoparticles, favoring the hexagonal boron nitride exfoliation. On the other hand, for the storage modulus and degree of crystallinity, the sharpest increase occurred in the hybrid nanocomposite in which the nanoparticles could interact preferably with one polymer phase. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 137, 48711.

Section: Resultsmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

See 3 more Smart Citations

Effects of processing conditions on hybrid filler selective localization, rheological, and thermal properties of poly(ε‐caprolactone)/poly(lactic acid) blends

Decol

Pachekoski

Segundo

et al. 2019

Effect of polyethylene glycol on mechanical properties of bamboo fiber‐reinforced polylactic acid composites

Long

Dong

et al. 2019

The bamboo fiber (BF)-reinforced polylactic acid (PLA) composites were prepared using the twin-screw extruder and injection molding. Thermal gravimetric analyzer results indicated the thermal stability of BF/PLA composites decreased with increasing BF content. Differential scanning calorimeter and X-ray diffraction curves showed that BF played a role as a nucleating agent, but the crystallinity of composite materials decreased with the increasing BF content. The melt flow rate of composites reduced with the increase in BF content, resulting in a poorer processing property. The processability of the composites was improved with the addition of high molecular polyethylene glycol (PEG). Mechanics performance test showed that tensile strength and bending strength of composites increased at low loading with the BF content increased then decreased when the loading continued to increase. The tensile strength of the composite materials reached 65.46 MPa when alkali-treated BF (ABF) content was 20 wt %. The flexural strength of the composites reached 97.94 MPa when ABF content was 10 wt %. Impact performance has also been improved. PEG-20000 was the best plasticizer among the PEG-6000，PEG-10000, and PEG-20000. When the component of PEG was 10 wt %, the elongation increased by 56%. The scanning electron microscopy (SEM) result showed that the fracture of the composites was smooth, most ABF were wrapped in matrix and distribution of ABF in PLA matrix was more uniform. It means that interfacial compatibility of bamboo fiber and PLA improved after BF modified by alkali. High molecular weight PEG enhance melt flow ability of polymer, result in fibers were further enclosed in the PLA matrix and increase properties of composites.

The effect of silk fibroin nanoparticles on the morphology, rheology, dynamic mechanical properties, and toughness of poly(lactic acid)/poly(ε‐caprolactone) nanocomposite

Chomachayi

Jalali‐Arani

Urreaga

2020

The silk fibroin nanoparticles (SFNPs) were extracted from silkworm cocoons and used as a nanofiller in poly(lactic acid) (PLA)/poly(ε‐caprolactone) (PCL) blend. The nanoparticle localization was studied theoretically and experimentally and the effects of SFNP on the morphology, rheology, toughness, and dynamic mechanical properties of the blend were investigated. According to the calculated wetting coefficient, SFNP should be thermodynamically located in the PLA matrix during the melting process. The results of SEM illustrated a common sea‐island structure for the PLA/PCL blend and the incorporation of SFNP reduced the PCL domain sizes from 1.170 ± 92 μm to 794 ± 46 nm. The atomic force microscopy results showed that the nanoparticles are mainly located in the PLA matrix and also, partially at the phase interface with a thickness of layers around 80 nm. The rheological tests displayed the network formation of SFNP in the prepared nanocomposites. The dynamic mechanical analysis revealed that by the addition of SFNP, the storage modulus of neat PLA and PLA/PCL blend were increased by around 57 and 50%, respectively and the glass transition temperatures (Tg) values of PLA and PCL shifted toward each other. Additionally, using SFNP caused a lower water uptake and higher impact strength (~64%) of the blend.