Ostwald Ripening Improves Rate Capability of High Mass Loading Manganese Oxide for Supercapacitors

Abstract

Realizing fast charging–discharging for high mass loading pseudocapacitive materials has been a great challenge in the field of supercapacitors because of the sluggish electron and ion migration kinetics through the thick electrode materials. Here we demonstrate for the first time a facile hydrothermal treatment that can substantially enhance the rate capability of a highly loaded manganese oxide electrode via the Ostwald ripening process. Hydrothermal treatment improves not only the electrical conductivity of manganese oxide but also the ion diffusion rate in the thick oxide film. At slow scan rates below 40 mV s–1, the capacitance of the hydrothermally treated manganese oxide electrode increases linearly with mass loading (up to 23.5 mg cm–2) as expected for a capacitor under the non-diffusion-limited conditions. At high scan rates beyond 100 mV s–1, capacitive saturation is observed only at a high mass loading of ∼9 mg cm–2, which is significantly greater than the values reported for other manganese oxide electrodes. The electrode achieves an areal capacitance of 618 mF cm–2 at a high scan rate of 200 mV s–1, which is 3 times greater than that of the untreated sample. An asymmetric supercapacitor assembled with a hydrothermally treated manganese oxide cathode and a vanadium oxide/exfoliated carbon cloth anode can deliver a good volumetric energy density of 5 mWh cm–3. This value is 2–10 times greater than the values obtained from supercapacitors with comparable dimensions.

Hybrid Iron Oxide on Three‐Dimensional Exfoliated Graphite Electrode with Ultrahigh Capacitance for Energy Storage Applications

“…As shown in Figure c inset and Figure d, high resolution SEM and TEM images reveal that the nanosheets with mesoporous structure were constructed by a number of irregular iron oxide particles in the range of 10∼30 nm, which is significantly different from the iron precursor as shown in Figure a and b. This morphology change could be attributed to the Ostwald ripening process, during which the smaller crystallites in the nanosheets tended to dissolve and redeposited on the larger ones, generating the irregular oxide particles and interior cavities . These generated cavities can facilitate the ion transportation, and thus improve the rate performance of the materials.…”

A Universal Principle to Design Reversible Aqueous Batteries Based on Deposition–Dissolution Mechanism

“…In mild electrolyte, Cu 2 O was formed during deposition process ( Figure S9, Supporting Information), which might insulate the kinetics of ion transfer. [14] The spin-energy splitting of Mn 3s peaks is 4.81 eV, attributing to Mn in the charge state of 3.53. With respect to the MnO 2 cathode, CC was immersed into the electrolyte to support deposition and dissolution of MnO 2 .…”

Flexible Graphene/Carbon Nanotube Electrochemical Double‐Layer Capacitors with Ultrahigh Areal Performance

“…(f) Comparison between the Ragone plot of the WJM-G/SDWCNTs EDLCs (for all investigated electrode active material mass loadings) and some relevant EDLCs reported in literature (~: ref. [132] data calculated from reported thickness; refs [15,16,[129][130][131][132]. &: ref.…”