Overview of the early campaign diagnostics for the SPARC tokamak (invited)

This article covers the in-vessel design of the SPARC interferometry diagnostic system, highlighting unique aspects of the systems design and port plug integration in preparation for “day-1” plasma operations as a critical diagnostic for density feedback control. An early decision for the diagnostic was to deploy two lasers in the infrared wavelength spectrum, allowing the system to have a higher optical throughput. The optimization of the in-vessel geometry for the diagnostic follows a similar approach, focusing on de-risking possible damage to the plasma facing optical components by moving them further from the plasma with an orientation that provides a greater possibility for protective features to be added. The inclusion of in-vessel optical assemblies requires detailed design efforts of custom all-metal parts, designed to remain functional when subjected to harsh operational conditions, in many cases for the entire SPARC lifetime. The details presented here were included in the design to ensure that the assemblies can not only withstand a major electromagnetic disruption or thermal event but also maintain good stability through normal operations. The design also addresses more nuanced effects, such as the transient heat loading of the plasma facing mirrors. Through the utilization of modeling and design tools, these effects were brought into the design and simulation workflow, further reducing uncertainty as the system moves toward system commissioning.

In-vessel design of a two-color heterodyne laser interferometer system for SPARC

Hawke,

LaCapra,

Ilagan

et al. 2024

Synthetic measurements of runaway electron synchrotron emission in the SPARC tokamak

Tinguely,

Rosenthal,

Silva Sa

et al. 2024

With plasma currents up to 8.7 MA, the SPARC tokamak runs the risk of forming multi-MA beams of relativistic “runaway” electrons (REs), which could damage plasma facing components if unmitigated. The infrared (IR) and visible imaging and visible spectroscopy systems in SPARC are designed with measurements of synchrotron emission from REs in mind. Synchrotron radiation is emitted by REs along their direction of motion, opposite the plasma current. Matched clockwise and counterclockwise wide views are proposed to detect synchrotron and background radiation, allowing observation of RE synchrotron emission in both plasma current configurations. Due to SPARC’s high toroidal magnetic field strength, 12.2 T on axis, the synchrotron light spectrum is expected to peak in the visible-IR wavelength range. The synthetic diagnostic tool, Synchrotron Orbit-Following Toolkit, is used to model synchrotron images and spectra for three scenarios, with appropriate magnetic equilibria for each: REs generated during plasma current ramp-up, steady-state flat-top (although unlikely, but serving as a reference), and disruptions. Required time resolutions, achievable spatial coverage, and appropriate spectral ranges for various RE energies are assessed.

Overview of the neutron diagnostic systems for the SPARC tokamak

Raj,

Ball,

Carmichael

et al. 2024

Neutron measurement is the primary tool in the SPARC tokamak for fusion power (Pfus) monitoring, research on the physics of burning plasmas, validation of the neutronics simulation workflows, and providing feedback for machine protection. A demanding target uncertainty (10% for Pfus) and coverage of a wide dynamic range (>8 orders of magnitude going up to 5 × 1019 n/s), coupled with a fast-track timeline for design and deployment, make the development of the SPARC neutron diagnostics challenging. Four subsystems are under design that exploit the high flux of direct DT and DD plasma neutrons emanating from a shielded opening in a midplane diagnostic port. The systems comprise a set of ∼15 flux monitors, mainly ionization chambers and proportional counters for measurement of the neutron yield rate, two independent foil activation systems for measurement of the neutron fluence, a spectrometric radial neutron camera for poloidal profiling of the plasma emissivity, and a high-resolution magnetic proton recoil spectrometer for measurement of the core neutron spectrum. Together, the four systems ensure redundancy of sensors and methods and aim to provide high resolutions of time (10 ms), space (∼7 cm), and energy (<2% at 14 MeV). This paper presents the broader objectives behind the preliminary design of the SPARC neutron diagnostics and discusses the ongoing studies on neutronics, detector comparisons, prototyping, and integration with the unique infrastructure of SPARC. Engineering details of the four subsystems and the concepts for in situ neutron calibration are also highlighted.