Parametric Study of Acoustic Excitation-Based Glycerol-Water Microsphere Fabrication in Single Nozzle Jetting

Abstract

Microspheres or droplets are increasingly finding various biomedical applications as drug microspheres and multicellular spheroids. Single nozzle-based continuous jetting with the help of acoustic excitation and/or carrier stream is a basic process for monodisperse microsphere fabrication. Precise control of microsphere size and size distribution in single nozzle jetting is still of great manufacturing interest. The objective of this study is to numerically model a glycerol-water microsphere fabrication process during acoustic excitation-based single nozzle continuous jetting. Using a volume of fluid method, this study has investigated the effects of material properties and fabrication conditions such as the acoustic excitation frequency and amplitude and the carrier stream velocity on the size of microspheres fabricated. (1) The microsphere diameter decreases as the glycerol volume percentage increases. (2) The excitation frequency and pressure have a pronounced effect on the microsphere size. The microsphere diameter decreases as the excitation frequency increases, and the microsphere diameter increases with the excitation pressure amplitude. (3) The microsphere size decreases as the carrier stream velocity increases.

Alginate microsphere fabrication using bipolar wave-based drop-on-demand jetting

“…While there are some conclusions regarding the effects of sodium alginate and calcium chloride concentrations, dwell time, and dwell and echo voltages, there are no conclusions regarding the effects of the rise, fall, final rise and echo times and the excitation frequency based on this study and more experimental and theoretical studies [34] are expected to elucidate these effects. In addition, future work shall use a scale analysis or computational approach to understand the physical principle governing droplet characteristics as a function of material properties and operating conditions.…”

Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes

“…The resolution of the printed structure is dependent on the droplet size which is a function of the orifice size and operating conditions. Since the dispense head had a 120 µm diameter orifice, the droplet size was mainly controlled by applied operating conditions for given printing materials as discussed in (Herran and Huang, 2012; Herran et al, 2010).…”

Effects of fluid properties and laser fluence on jet formation during laser direct writing of glycerol solution

“…During orifice-based direct writing, fluid jets are first ejected from an orifice and then broken into droplets with, or without, satellite droplets. 14,15 The droplets that are generated combine to form various structures in a controllable manner. During laserassisted orifice-free direct writing such as LIFT, the material transfer and deposition can be due to either ejected droplets 7,16 or the contact between formed long, thin jet and the receiving substrate 17,18 depending on the direct writing height and the material properties.…”