Particle image velocimetry study of the flow control effects of singular and multiple curved serration models

Abstract

This paper reports on preliminary observations of an investigation of flows associated with models that mimic serrations on the leading edge of barn owl feathers. The objective was to use particle image velocimetry measurements to determine the capacity of singular and multiple curved (three-dimensional) serration models to modify the noise-reducing indicators of a narrow-channeled flow past a cylinder. Four models were tested: 3 singular serration models of respective angles of inclination, α = 24°, 27.5° and 31°, and a model consisting of an array of 3 serrations of α = 24°, 27.5° and 31°. Each case was subjected to flow of Reynolds number (based on the serration height and maximum velocity of the flow) of ∼2,000, simulating the flow regime of local flow around barbs of real barn owl flights. A planar particle image velocimetry technique was used to capture the midspan plane velocities to determine the effects of each model. The results show that using singular serration models of inclination angles than 30° may lead to disorganized spatial structures and enhanced turbulence levels. On the other hand, an array of only 3 curved serrations of different geometries can modify the spatial flow structure into a well-ordered one, resulting in a 50% reduction in turbulence intensities. These initial results suggest that under complex flow conditions, the insertion of single and multiple curved serrations can lead to significant flow changes that may result in potential noise modifications.