Pedestrian Delay Model for Continuous Flow Intersections under Three Design Patterns

Abstract

In order to accurately evaluate the level of service of pedestrians and provide the basis for the optimized design, the pedestrian delay of the continuous flow intersection was analyzed. According to the characteristics of streams of pedestrians’ arriving and leaving, the pedestrian delay models of different directions (namely, straight and diagonal) were established for three pedestrian passing patterns of the continuous flow intersection. The accuracy of the models was verified by VISSIM. The deviation was less than 3%. The effects of three key factors, namely, the vehicle demands, pedestrian demands and percentage of diagonal crossing, on the delay of the pedestrian under three modes were discussed by sensitivity analysis. The results show that the traditional pedestrian passing pattern mainly applies on the conditions that vehicle and pedestrian demands are low. The pattern of interspersed pedestrian passing is mainly applicable to the conditions of high vehicle and pedestrian demands. Although the pattern of exclusive pedestrian passing phase was least selected as the optimal design, it can apply to traffic demand fluctuating condition for its insensitive to volume and pedestrian demand pattern.

Bilevel Programming for Traffic Signal Coordinated Control considering Pedestrian Crossing

“…is model is not suitable for areas where pedestrian flow is high, and the calculated value will be small. [35].…”