This literature discusses the importance of green surfactants in the oil and gas industry as one of the injection types in EOR. The use of green surfactants is good for protecting the environment and marine biodiversity from conventional chemical surfactants. The injection of green surfactants uses natural materials from Soapnut, Mulberry, and Sapindus rarak. These three types of plants are abundant in Indonesia and contain saponin as a material in making good surfactants. Saponin is an amphipathic glycoside that can produce foam when shaken vigorously in a solution. The foam produced by saponin can increase the sweep efficiency in oil wells to increase production. The writing method used in this article is based on scientific literature that discusses the characteristics and physical properties of Soapnut, Mulberry, and Sapindus rarak. The IFT calculation for Soapnut between water and oil reduced from 19 dyne/cm to 2.5 dyne/cm as the surfactant concentration increased from 0 to 12 (w/w%). Mulberry from 43.9 to 17.9 dyne/cm and Sapindus rarak from 3.07 mN/m to 0.96. These natural surfactants enhance water flooding efficiency by 19.6% OOIP, reduces shale contact angle from 52.44 to 19.66, emphasizing natural surfactants oil recovery potential with environmental benefits.