Perancangan dan Analisis Tegangan pada Desain Footrest Sepeda Motor Menggunakan Autodesk Inventor

Abstract

Motorbikes are widely chosen by the public as a mode of transportation in modern times, one of which is the automatic scooter type motorcycle. Visually, the matic scooter type motorcycle components have a nice and attractive shape, but this shape does not necessarily guarantee its safety. Not a few of these components have failed (broken) as happened to the footrest. Footrest is a component of a motorcycle vehicle that functions as a footrest for motorcycle passengers. Every different type of motorbike, the footrest shape is also different. The purpose of this study is to design a footrest design and analyze it with the help of software to obtain a footrest design that has a high safety factor value. The design of the motorcycle footrest design produces 3 different designs. The three designs were analyzed using the Autodesk Inventor 2017 software stress by providing a static load of 20 Kg and 90 Kg. From the analysis, the minimum safety factor value obtained from each footrest design against a load of 20 kg in design 1 is 13.42, design 2 is 5.7, and design 3 is 7.93. While the minimum safety factor value generated from each footrest design against a load of 90 kg in design 1 is 2.98, design 2 is 1.27, and design 3 is 1.76. Based on the results of the safety factor analysis carried out, the three designs are safe enough to withstand loads of 20 Kg and 90 Kg. But design 1 is safer because the resulting value of the safety factor is higher than the three designs, which is 2.98 to withstand a load of 90 Kg.

Analisis Statis Desain Chassis Kendaraan Listrik 2 Penumpang

“…Dari hasil ini, dapat melihat bahwa kesalahanya (nilai error) kurang dari 5%. Tingkat kesalahanya untuk penelitian ini kurang dari 5% dinyatakan masih pada batas wajar[15].Analisis material BesiHollow ASTM A 500 menggunakan perangkat lunak Autodesk Inventor 2019 menunjukan data safety factor besarnya 4,875, sedangkan safety factor di perhitungan manual besarnya 4,875. Dari hasil ini, dapat melihat bahwa kesalahanya (nilai error) kurang dari 5%.…”