Performance and cost of CCS in the pulp and paper industry part 2: Economic feasibility of amine-based post-combustion CO 2  capture

Onarheim, Kristin; Santos, Stanley; Kangas, Petteri; Hankalin, Ville

doi:10.1016/j.ijggc.2017.09.010

Cited by 50 publications

(24 citation statements)

References 6 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Carbon capture and storage (CCS) provides a practical solution for mitigating CO 2 emissions released by power plants and other industrial processes . However, the current aqueous amines used in CCS processes suffer from a large energy penalty . High‐temperature solid sorbents are proposed to solve this problem, as they directly capture CO 2 from hot flow gases and significantly decrease the energy loss .…”

Section: Introductionmentioning

confidence: 99%

“…[3] However, the current aqueous amines used in CCS processes suffer from a large energy penalty. [4] High-temperature solid sorbents are proposed to solve this problem, as they directly capture CO 2 from hot flow gases and significantly decrease the energy loss. [5] A series of possible candidates including CaO-based sorbents, [6] layered double hydroxides [7] and ceramic materials [8] have been examined.…”

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

Development of Alkali Nitrate‐Containing Li₄SiO₄ for High‐Temperature CO₂ Capture

et al. 2018

View full text Add to dashboard Cite

High efficiency alkali nitrate‐containing Li4SiO4 sorbents were synthesized by a hydration technique to improve their sorption performances at low CO2 concentrations. X‐ray diffraction (XRD), scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC), and thermogravimetric analyses were used to detect the characteristics of the samples. The results showed that the presence of KNO3 and NaNO3 induced small crystallite size, corrugated morphologies and the formation of eutectic phases, noticeably facilitating sorption processes. At the optimized additive amount of 0.035 mol %, NaNO3‐containing Li4SiO4 reached a maximum absorption capacity (≈34.6 wt %). Moreover, both alkali nitrate‐containing Li4SiO4 sorbents showed good cyclic properties, demonstrating their great potential for high‐temperature CO2 capture.

show abstract

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Development of Alkali Nitrate‐Containing Li₄SiO₄ for High‐Temperature CO₂ Capture

et al. 2018

View full text Add to dashboard Cite

show abstract

“…Another example is the study of Berghout et al (2019) who assessed deployment pathways for emissions reductions in refineries by considering carbon capture in combination with other mitigation options. Several studies have investigated the possibility for carbon capture in the pulp and paper industry [see e.g., Onarheim et al (2017) and references therein]. Based on such studies it may be concluded that the potential for post-combustion technology is more promising for chemical market pulp mills than for integrated pulp and paper mills due to potentially larger amounts of excess heat available in chemical market pulp mills that can be used to cover the heat demand of the capture process.…”

Section: Introductionmentioning

confidence: 99%

Marginal Abatement Cost Curve of Industrial CO2 Capture and Storage – A Swedish Case Study

2020

View full text Add to dashboard Cite

Carbon capture and storage (CCS) is expected to play a key role to achieve deep emission cuts in the energy intensive industry sector. The implementation of carbon capture comes with a considerable investment cost and a significant effect on the plants operating cost, which both depend on site conditions, mainly due to differences in flue gas flow and composition and depending on the availability of excess heat that can be utilized to power the capture unit. In this study we map the costs required to install and operate amine-based post-combustion CO 2 capture at all manufacturing plants in Sweden with annual emissions of 500 kt CO 2 or more, of both fossil and of biogenic origin, of which there are 28 plants (including a petrochemical site, refineries, iron and steel plants, cement plants and pulp and paper mills). The work considers differences in the investment required as well as differences in potential for using excess heat to cover the steam demand of the capture process. We present the resulting total CO 2 capture costs in the form of a marginal abatement cost curve (MACC) for the emission sources investigated. Cost estimations for a transport and storage system are also indicated. The MACC shows that CO 2 capture applied to 28 industrial units capture CO 2 emissions corresponding to more than 50% of Swedish total CO 2 emissions (from all sectors) at a cost ranging from around 40 €/t CO 2 to 110 €/t CO 2 , depending on emission source. Partial capture from the most suited sites may reduce capture cost and, thus, may serve as a low-cost option for introducing CCS. The cost for transport and storage will add some 25 to 40 €/t CO 2 , depending on location and type of transportation infrastructure.

show abstract

“…These results are summarized in Figure 3-9, showing the determined ranges and averages for the selected processes. Source: based on data from [23,26,[88][89][90][91][102][103][104][105][106][107] As can be seen in Figure 3-9, for some sub-categories listed in Table 2-4, appropriate values cannot be provided. On the one hand, this is caused by the rough definition related to the available data for CO2 potentials, which does not further specify the underlying process (e.g., other chemicals, (other) metals processing).…”

Section: Technological Capture Ratesmentioning

confidence: 99%

Assessing the potential of carbon dioxide valorisation in Europe with focus on biogenic CO2

Rodin

Lindorfer

Böhm

et al. 2020

Journal of CO2 Utilization

View full text Add to dashboard Cite

This study investigates the theoretical potential and limitations of green carbon dioxide sources for technical valorisation approaches. The emission of greenhouse gases, especially CO2, must be rigorously reduced in order to achieve the European and global climate objectives. As CO2 is an increasingly valuable resource for industries and new disrupting technologies on CO2 utilization, the potential of CO2 obtained from different green and fossil sources in Europe is discussed for a comparative evaluation. Biogenic or green and fossil CO2 sources are classified according to their emitting processes and industry sectors, respectively. The CO2 potentials are then calculated from statistical data for CO2 generating processes in Europe, complemented and verified by relevant papers and reports. This study demonstrates the European potential of capturing and utilizing the biogenic and fossil CO2. In Europe, 69.7 Mt/a CO2 are estimated to be produced by biogas upgrading, biogas combustion, as well as bioethanol and other fermentation processes. Additionally, 437 Mt/a CO2 are produced by solid biomass combustion. This accounts for a theoretical potential of 506.7 Mt/a CO2 currently available, which is nearly seven times the amount of the current European industrial CO2 demand. The CO2 from biomass combustion is more difficult to capture and is mixed with impurities, which potentially reduces its technical and economic potential, whereas the 63 Mt/a from other high-purity sources are already partially utilized, e.g., by breweries or dry ice producers.

show abstract

Performance and cost of CCS in the pulp and paper industry part 2: Economic feasibility of amine-based post-combustion CO 2 capture

Cited by 50 publications

References 6 publications

Development of Alkali Nitrate‐Containing Li₄SiO₄ for High‐Temperature CO₂ Capture

Development of Alkali Nitrate‐Containing Li₄SiO₄ for High‐Temperature CO₂ Capture

Marginal Abatement Cost Curve of Industrial CO2 Capture and Storage – A Swedish Case Study

Assessing the potential of carbon dioxide valorisation in Europe with focus on biogenic CO2

Contact Info

Product

Resources

About

Performance and cost of CCS in the pulp and paper industry part 2: Economic feasibility of amine-based post-combustion CO 2 capture

Cited by 50 publications

References 6 publications

Development of Alkali Nitrate‐Containing Li4SiO4 for High‐Temperature CO2 Capture

Development of Alkali Nitrate‐Containing Li4SiO4 for High‐Temperature CO2 Capture

Marginal Abatement Cost Curve of Industrial CO2 Capture and Storage – A Swedish Case Study

Assessing the potential of carbon dioxide valorisation in Europe with focus on biogenic CO2

Contact Info

Product

Resources

About

Development of Alkali Nitrate‐Containing Li₄SiO₄ for High‐Temperature CO₂ Capture

Development of Alkali Nitrate‐Containing Li₄SiO₄ for High‐Temperature CO₂ Capture