Performance Assessment of Three Latent Heat Storage Designs for a Solar Hot Water Tank

Abstract

Solar hot water tanks (SHWT) based on a latent heat storage system are gaining momentum for their integration into solar heater water collectors. They can efficiently store daytime solar thermal energy and shift on-peak period loads to off-peak periods. However, their performance is generally limited by the tank configuration, the design of the thermal storage system, and the selection of the appropriate phase change material (PCM). This work presents a numerical investigation of three SHWT-PCM storage designs. A mathematical model was developed to predict the effectiveness of the geometric design and operating conditions in the SHWT-PCM system. Moreover, a sensitivity analysis was performed on the PCM type and PCM thermo-physical properties. The obtained numerical results demonstrated that the energy efficiency of the SHWT-PCM system was significantly impacted by the PCM thermo-physical properties (melting temperature, thermal conductivity, and enthalpy). In addition, it was found that using encapsulated PCM tubes with an external PCM jacket in the SHWT can result in a thermal efficiency of 70%.

Latent Thermal Energy Storage for Solar Industrial Drying Applications

“…Several numerical and experimental studies dealt with the analysis of latent heat storage systems for various solar thermal applications. The great portion of published studies were conducted for residential hot water end-use, such as the work of Zakri et al [32], Bazri et al [33], Yari et al [34], and Chopra et al [35]. Also, some existing works focused on the applicability of latent heat storage in greenhouses [36] and solar power plants for electricity generation [37].…”