Performance Evaluation of Multistage Fractured Horizontal Wells in Tight Gas Reservoirs at Block M, Ordos Basin

Li, Wu; Zhang, Jiqun; Jia, Dongfang; Wang, Shuoliang; Yan, Yiqun

doi:10.3390/en15020613

Cited by 3 publications

(1 citation statement)

References 48 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Tracer testing has also been proven to help in unconventional reservoirs. The unconventional reservoirs are subjected to multiple fracturing and EOR techniques (Joshi et al 2022); tracers can also be utilized to study the effect of production while fracturing and EOR process are underway (Wu et al 2022). Therefore, providing a real-time data analysis of the process helps in optimizing the same.…”

Section: Discussionmentioning

confidence: 99%

A review of tracer testing techniques in porous media specially attributed to the oil and gas industry

Patidar

Joshi

Dristant

et al. 2022

J Petrol Explor Prod Technol

View full text Add to dashboard Cite

The significance of the tracer testing technique is widely accepted in reservoir performance analysis in hydrology as well as in hydrocarbon exploration and production. The subsurface reservoir delineation for hydrocarbon exploration and optimum production is one of the most critical aspects of petroleum system analysis. The quality of the reservoir and its performance prediction require extensive knowledge of qualitative reservoir geology, its depositional environment, facies heterogeneity and engineering properties of subsurface formations. Tracer testing is amongst the few techniques available in the oil and gas (O&G) industry, which stands up to these expectations and is successfully used for quantitative determination and analysis of sub-seismic scale structural and stratigraphic heterogeneities. Tracer testing is also being utilized in determining residual oil saturation (Sor) and lateral correlation of reservoir properties in the subsurface. Apart from the O&G industry, the concentration-based applications of tracer testing have been proved in hydrology, geothermal and medical science. A comprehensive review is presented to explain the application of tracer testing technique to investigate porous media, mainly in O&G industry. The type of tracers used, their selection criteria, concentration, and natural versus gradient and qualitative to a quantitative application are discussed in the current review. Generally, two types of tracers (chemical and radioactive) are preferred in the petroleum industry for gas/fluid flow assessment, waterflood optimization and establishing connectivity between multiple wells. The current paper reviews both types of tracer tests, namely single well and inter well, in detail discussing the objectives, calculations, designing, injection, sampling, laboratory analysis and knowledge integration. The preliminary aim was to provide a review of the tracer testing technique used in reservoir evaluation and well-to-well connectivity analysis.

show abstract

Section: Discussionmentioning

confidence: 99%

A review of tracer testing techniques in porous media specially attributed to the oil and gas industry

Patidar

Joshi

Dristant

et al. 2022

J Petrol Explor Prod Technol

View full text Add to dashboard Cite

show abstract

Lattice Boltzmann modeling of the coupled imbibition-flowback behavior in a 3D shale pore structure under reservoir condition

Liu

et al. 2023

Front. Earth Sci.

View full text Add to dashboard Cite

Imbibition and flowback of fracturing fluid usually occur in the shale matrix after hydraulic fracturing, which significantly impacts shale gas production and environmental protection. The rocks of deep shale gas reservoirs are under high-temperature and high-temperature conditions. There are rich micro-nano pores with various pore structures in deep shale. In addition, the flowback behavior is significantly affected by the imbibition behavior because the flowback begins after the end of the imbibition. Therefore, an accurate pore-scale description of the coupled imbibition-flowback behavior is crucial to understand the flowback mechanism and its impacts. In this paper, a pseudo-potential lattice Boltzmann method is employed to simulate the coupled imbibition-flowback behavior in a digital shale core, where the digital core is reconstructed by Markov Chain-Monte Carlo method based on scanning microscope images of deep shale cores. The microcosmic mechanism of the imbibition and flowback is studied under deep shale conditions. The influence of some factors, such as pore structure, fluid viscosity, wettability, and flowback pressure difference, on the flowback behavior of fracturing fluid is investigated. It is found that the fracturing fluid advances almost uniformly throughout the pore space during the imbibition process. The fracturing fluid is easy to adsorb on the pore wall, and the shale gas is located in the middle of the pore space. The viscous fingering is clearly observed during the flowback process, where shale gas flows through large pores to form a flow channel, and the fracturing fluid stays in tiny pores. The flowback rate increases gradually with the flowback time and eventually tends to be almost constant. The wettability, flowback pressure difference, and pore structure significantly influence the flowback behavior, while the fracturing fluid viscosity has a smaller effect on the flowback process.

show abstract

Microscopic Pore Structure Characteristics and Fluid Mobility in Tight Reservoirs: A Case Study of the Chang 7 Member in the Western Xin’anbian Area of the Ordos Basin, China

et al. 2023

View full text Add to dashboard Cite

This research addresses the limited understanding of movable fluid occurrence characteristics in the Chang 7 reservoir by employing mercury injection capillary pressure, constant-rate mercury injections, and nuclear magnetic resonance methods. This study investigates the microscopic pore structure characteristics and movable fluids in the tight reservoir of the western Xin’an region, located in the Ordos Basin. The finding reveals that as permeability decreases, the distribution of the throat radius becomes more concentrated in the low-value area, resulting in a narrow distribution range with high curve peaks. Conversely, with an increasing permeability, the distribution range expands towards the high-value area while the curve peak decreases. This research underscores the significance of the throat radius, especially the main flow throat radius, in constraining the permeability of rock samples. Furthermore, this study highlights a stronger correlation between permeability and movable fluid saturation than porosity. This finding emphasizes the importance of considering movable fluid saturation when assessing reservoir characteristics. Notably, the throat radius plays a crucial role in influencing the occurrence characteristics of movable fluids, with a smaller throat radii posing hindrances to fluid flow in the reservoir. Additionally, the presence of clay minerals in the reservoir leads to pore segmentation and increased fluid flow resistance, ultimately reducing the saturation of movable fluids. I must be understood that these factors are essential for developing and producing reservoirs with similar characteristics. In conclusion, the insights gained from this study hold considerable theoretical value and provide essential references for developing and producing reservoirs with tight characteristics, particularly in the western Xin’an region of the Ordos Basin.

show abstract

Performance Evaluation of Multistage Fractured Horizontal Wells in Tight Gas Reservoirs at Block M, Ordos Basin

Cited by 3 publications

References 48 publications

A review of tracer testing techniques in porous media specially attributed to the oil and gas industry

A review of tracer testing techniques in porous media specially attributed to the oil and gas industry

Lattice Boltzmann modeling of the coupled imbibition-flowback behavior in a 3D shale pore structure under reservoir condition

Microscopic Pore Structure Characteristics and Fluid Mobility in Tight Reservoirs: A Case Study of the Chang 7 Member in the Western Xin’anbian Area of the Ordos Basin, China

Contact Info

Product

Resources

About