Physical simulation of residual oil displacement production in offshore strong bottom water reservoir

Abstract

The C oilfield is located in the Bohai Bay Basin, a typical strong bottom water reservoir. Oilfield reservoir and oil–water distribution are complex. At present, the C oilfield has entered the high water cut development stage, and it is challenging to stabilize oil and control water. The reservoir with an imperfect well pattern has dominant bottom water ridge channels, uneven oil–water interface uplift, limited water drive sweep range, and low inter-well reservoir production degree. The oil layer between the horizontal section of the production well and the top of the reservoir cannot be effectively developed, and the remaining oil is enriched. Therefore, it is urgent to explore new energy supplement methods to improve inter-well and vertical remaining oil production in the C oilfield. In this study, the displacement medium is optimized through indoor experimental simulation. From the experimental results, the remaining oil between the sand bodies can be used in heavy oil reservoirs, and the residual oil between wells can be significantly utilized in the alternate displacement of gas and foam, and the recovery degree of the reservoir is increased by 12.44%. The remaining oil at the top of the reservoir can be used in the upper reservoir to increase the remaining oil in the top of the reservoir by injecting gas and foam alternately in the new reservoir. The final recovery of the reservoir is increased by 6.00%. This experimental study guides tapping the potential of the remaining oil in the offshore strong bottom water reservoir.