Piezoelectric Coefficient Properties of a Flexible PZT/Upe/C Composite

Abstract

A flexible piezoelectric composite, made from Lead Zirconate Titanate(PZT) powder and Unsaturated polyester (UPE) resin, was doped with small amount of carbon semiconductor powder. The piezoelectric strain coefficient (d 33 ) and the dielectric behavior have been studied for this ceramic/polymer composite. The dielectric constant processes of the composite were observed to be dominated by those of undoped ceramic-polymer. The practical results of PZT/UPE/C with ratio 49/50/1 adding a semiconductor phase in the composite showed piezoelectric strain coefficient can be controlled and a continuous electric flux path could be created between the PZT grains. This composite may be poled at low voltage and in shorter time compared with composites without a conductive phase.

Piezoelectricity performance and β-phase analysis of PVDF composite fibers with BaTiO3 and PZT reinforcement

“…Consequently, ceramic-polymer piezoelectric composites received growing attention over the last few years due to the combination properties of ceramic and polymer. They seem not only to have the mechanical strength, flexibility and formability of the polymer they also possess ceramic superior properties and ease manufacture process [ 3 , 7 , 8 ].…”