“…Through gate patterning, in which etch stop on CG-Poly layer firstly, and then a thinner 3.0 nm of nitride (550 C deposition) deposited on the gate sidewall (SW) for preventing WSi x from extrusion. Afterwards, post ISSG of re-oxidation that is more tolerant to plasma-induced damage 10) was carried out at 900 C in a dry ambient with N 2 pre-annealing for plasma damage repair after CG-Poly, IPD, and FG-Poly dry etch where stop on GOX. In the case of the CG-Poly missing study, we used various methods such as (a) ISSG oxidation time reduction, (b) selective (lower oxidizing rate for SiN as compared with poly-Si surface) oxidation application, water vapor generator (WVG) which by catalytic reaction enhances the reactivity between hydrogen and oxygen to produce high-concentration water vapor, 11) and rapid thermal oxidation (RTO), 12) (c) thick SW nitride deposition, and (d) less stress WSi x film deposition.…”