Polycarbonate/SiC nanocomposites—influence of nanoparticle dispersion on molecular mobility and gas transport

Abstract

Plasma synthesized silicon carbide (SiC) nanoparticles were dispersed in dichloromethane/poly(bisphenol‐A‐carbonate) (PC) solutions by high power ultrasonification. Samples were then prepared by film casting under well adapted preparation conditions. The influence of the SiC nanoparticles on the molecular mobility of the PC is studied by dielectric relaxation spectroscopy. No effect on the cooperative segmental mobility (glass transition) was detected. But the relaxation region corresponding to localized fluctuations is strongly broadened and the activation energy is reduced with increasing nanoparticle concentration. The most significant change was observed in the relaxation region between α‐ and β‐process. The gas transport properties of these nanocomposite films are characterized in terms of permeability, diffusivity and solubility. Results can be interpreted based on an altered local free volume distribution and a change of molecular mobility of the polymer matrix near the nanoparticle surface which is in agreement with the dielectric results. Concentration dependent CO2 permeation experiments reveal a significant reduction of plasticization effects in the nanocomposites compared to the pure PC. Copyright © 2005 John Wiley & Sons, Ltd.

Superparamagnetic Polymer Nanocomposites with Uniform Fe3O4 Nanoparticle Dispersions

“…This is ascribed to a combination of molecular mobility, diffusion of the nanoparticles, and the nature of polymer-particle interactions. [2,24,25] A scanning electron microscopy (SEM) surface scan of such composite films would reveal only the terrain of the polymer surface, often showing no trace of the dispersed particles. To examine the interfaces between the layers, and view the particles that are embedded inside the polymer matrix, we conducted cross-sectional SEM and TEM imaging.…”

Recent Developments in the Permeability of Polymer Clay Nanocomposites

“…The sorption behavior is described by Henry's law: 6) where C D is the concentration of sorbed gas, k D is Henry's coefficient or Henry's solubility, and p is the partial pressure of the gas. This represents the gas molecules that exist in the dissolved state (between the polymer chains) and is related to the fluctuating fraction of the free volume of the polymer [6,7]. The subscript "D" denotes the dissolved state.…”

Interfacial surfactant competition and its impact on poly(ethylene oxide)/Au and poly(ethylene oxide)/Ag nanocomposite properties

“…The fundamental properties of nanoparticles depend not only on their structure but also on their shape, crystallinity, and crystal phase 2. Nanoparticles have been added to synthetic materials to improve their properties such as mechanical,3,4 electrical,4–6 and optical properties,7 and gas permeability 8,9. Usually, inorganic nanofillers, including metals and metal alloys (e.g., Au, Ag, Cu, Ge, Pt, Fe, and CoPt), semiconductors (e.g., PbS, CdS, CdSe, CdTe, and ZnO), clay minerals (e.g., montmorillonite, vermiculite, hectorite, and CaCO 3 ), other oxides (e.g., TiO 2 , SiO 2 , and ferric oxide), and carbon-based materials (e.g., carbon nanotubes, graphene, and carbon nanofibers), are added to polymers to be used in various applications 2.…”