Polyisoprene grafted white carbon black reinforced polyisobutylene‐based pressure‐sensitive adhesives: Comprehensive enhancement of adhesive performances

Abstract

Nowadays, inorganic fillers are widely used to enhance pressure‐sensitive adhesives (PSAs), but inorganic fillers have problems with poor compatibility and agglomeration. Furthermore, these types of PSAs usually have an antagonistic effect: as the shear performance improves, the initial tack decreases. This severely limits the application of PSAs. Herein, white carbon black (WCB) grafted with polyisoprene (PI) was prepared and used to enhance polyisobutylene‐based PSAs, and the optimal reaction conditions of grafting were explored. The shear and peel strength of PSAs all increase with the increase of the mass fraction of fillers. When the filler content is less than 10 wt%, the initial tack of PSAs increases. When the filler content exceeds 10 wt%, the initial viscosity of PSAs decreases, but it is still far higher than that of the unmodified WCB‐reinforced PSAs system. In addition, the rheological performances of PSAs were tested, further exploring the role of particle grafting in PSAs.Highlights PSAs reinforced with white carbon black grafted with polyisoprene were prepared. The optimal conditions for modified white carbon black have been determined. The grafting fillers have improved all the performance of PSAs. The grafting of fillers significantly reduces the antagonistic effect of PSAs. Rheology was used to explore the effect of filler grafting in the PSAs.