Polymer Geogrids: A Review of Material, Design and Structure Relationships

Abstract

Geogrids are a class of geosynthetic materials made of polymer materials with widespread transportation, infrastructure, and structural applications. Geogrids are now routinely used in soil stabilization applications ranging from reinforcing walls to soil reinforcement below grade or embankments with increased potential for remote-sensing applications. Developments in manufacturing procedures have allowed new geogrid designs to be fabricated in various forms of uniaxial, biaxial, and triaxial configurations. The design flexibility allows deployments based on the load-carrying capacity desired, where biaxial geogrids may be incorporated when loads are applied in both the principal directions. On the other hand, uniaxial geogrids provide higher strength in one direction and are used for mechanically stabilized earth walls. More recently, triaxial geogrids that offer a more quasi-isotropic load capacity in multiple directions have been proposed for base course reinforcement. The variety of structures, polymers, and the geometry of the geogrid materials provide engineers and designers many options for new applications. Still, they also create complexity in terms of selection, characterization, and long-term durability. In this review, advances and current understanding of geogrid materials and their applications to date are presented. A critical analysis of the various geogrid systems, their physical and chemical characteristics are presented with an eye on how these properties impact the short- and long-term properties. The review investigates the approaches to mechanical behavior characterization and how computational methods have been more recently applied to advance our understanding of how these materials perform in the field. Finally, recent applications are presented for remote sensing sub-grade conditions and incorporation of geogrids in composite materials.

A Review of Sustainable Approaches in Geo Textiles for Environment Conservation

“…The resistance of the geotextile to tensile loads generated in the soil occurs at sufficiently small strains to prevent excessive movement of the reinforced soil structure. The polymers used in these applications should have resistance to degradation by the soil and altering in these properties with time (i.e., creep behavior) must be insignificant [85,86].…”

“…Slit film, flat-tape fabrics are usually PP materials, which are quite strong but have relatively poor permeability. On the other hand, fabrics from fibrillated tape yarns have better permeability and more uniform interstice openings than flat-tape products [85,89]. 3.4.…”

Enhancing Trench Stability: A Geogrid Reinforcement Approach

“…The design of geogrids incorporates strategically positioned empty spaces between the polymer strips, facilitating their integration with soil, stone, and other geotechnical materials. This integration enhances the composite material's resistance, making geogrids a valuable asset [5]. In recent years, there has been a notable surge in studies focusing on geogrids and trench-related research.…”

Numerical Study of Geotextile-Reinforced Flexible Pavement Overlying Low-Strength Subgrade

“…Geosynthetics have emerged among sustainable and cost-effective construction materials [5]. Some of the most widely used forms of geosynthetics in terms of flexible pavement are geotextiles, geogrids, geocomposites, geocells, geonets, geofoams, and geobags [6][7][8]. They perform one or more of the following functions: separation, sealing lateral drainage, filtration, and reinforcement [9,10].…”