Geothermal exploration in northern Jordan is in juvenile phase. North eastern basaltic desert is expected to host, with other rock formations, a shallow geothermal field. For efficient geothermal potential evaluation, a complete understanding of thermo-physical properties of deep reservoir rocks is of utmost importance. Due to the complex technical thermo-physical evaluations of basalts in depth, surficial basalts extending to the west were evaluated. Accordingly, six basaltic sub-flows from Al Hashimiyya were examined into their thermo-physical and mechanical properties. The flows represent the western extinction of large olivine basalt eruption. Different properties were evaluated for oven dried samples: thermal conductivity, permeability, porosity, density and specific heat capacity. In addition, basalts mechanical properties were examined: compressional wave velocity, unconfined compressive strength, indirect tensile strength and point load tests. The results were correlated in proportional patterns. They indicated that thermal conductivity of the studied basalts is dependent on porosity and permeability in parallel with mineral composition. It's found that mechanical properties are controlled by porosity and permeability, too. The studied basalt properties exhibit slight deviation from the continental basalts thermo-physical and mechanical properties reported in the region. Thermal conductivity ranges between 1.89 and 1.32 W•m −1 •K −1 , whereas the porosity and permeability averages at 10.64% and 9.75899E−15 m 2 , respectively. Additionally, unconfined compressive strength averages at 104.9 Mpa and it's almost 20 times higher than indirect tensile strength which ranges from 8.73 to 2.21 Mpa. As the samples were tested under laboratory conditions, in situ conditions will not be reflected by such values. At greater depth, temperature, pressure and hydrothermal activities will certainly affect rock properties. Micro fractures, whether it will be filled or not, will affect basalts properties, too. The results of this work will be used to develop a comprehensive thermo-physico-mechanical How to cite this paper: Al-Zyoud, S. (2019) Thermo-Physical and Mechanical Properties of Al Hashimiyya Basaltic Rocks, Jordan.