Preliminary Assessment of an FBG-Based Landing Gear Weight on Wheel System

Abstract

Weight-on-Wheels (WoW) systems are aimed at indicating if the aircraft weight is loading onto the landing gear and its wheels, even partially. These systems are an integral part of the actuation system for safety-critical applications and shall provide reliable information on the actual operational status of the LG. That information reveals if the vehicle is in flight or on the ground. In this way, several kinds of accidents may be prevented, relating for instance, to the incorrect deployment of the landing gear, or even manoeuvres to a certain extent, therefore protecting the aircraft from dangerous damage. There are different architectures that have been proposed in the bibliography, some of them based on strain gauges deployed on the structure, or on proximity sensors installed on the wheels. Being this device and considered critical for safety, it is convenient to couple it with complementary measurements, recorded and processed by different sources. In general, it can be stated that such an intelligent sensor network may be seen as a fundamental support for proper landing gear deployment. The presented paper reports the results of a preliminary investigation performed by the authors to evaluate the possibility of deploying fibre optics on the landing gear structure as part of a WoW system to retrieve the required information. This choice would have a remarkable effect in terms of significant cabling reduction (a single array of sensing elements could be deployed over a single line), and cost abatement from both a manufacturing and operational point of view. There are many other benefits also when referring to an optical instead of a standard electrical sensor system. Due to its small size and ease of integration into different families of materials, it could be considered a system for monitoring the operating status of most actuators on board modern aircraft.

Drive Systems for Landing Gears Numerically Simulated in AMESim Software

“…In [12][13][14], there is the analysis of the optimized design and landing gear load. Modern solutions for landing gear health monitoring are in [15]. Landing gear doors loads and landing gear noise reduction are found in [16] and [17], respectively.…”