Preparation and Application of Conductive Textile Coatings Filled with Honeycomb Structured Carbon Nanotubes

Abstract

Electrical conductive textile coatings with variable amounts of carbon nanotubes (CNTs) are presented. Formulations of textile coatings were prepared with up to 15 wt % of CNT, based on the solid weight of the binder. The binders are water based polyacrylate dispersions. The CNTs were mixed into the binder dispersion starting from a commercially available aqueous CNT dispersion that is compatible with the binder dispersion. Coating formulations with variable CNT concentrations were applied on polyester and cotton woven and knitted fabrics by different textile coating techniques: direct coating, transfer coating, and screen printing. The coatings showed increasing electrical conductivity with increasing CNT concentration. The coatings can be regarded to be electrically conductive(sheet resistivity<103 Ohm/sq)starting at 3 wt% CNT. The degree of dispersion of the carbon nanotubes particles inside the coating was visualized by scanning electron microscopy. The CNT particles form honeycomb structured networks in the coatings, proving a high degree of dispersion. This honeycomb structure of CNT particles is forming a conductive network in the coating leading to low resistivity values.

The Efficacy of Polymer Coatings for the Protection of Electroless Copper Plated Polyester Fabric

“…The introduction of electrical conductivity onto the surface of textiles leads to the production of high-added value textiles i.e., the dubbed electronic textiles (e-textiles), with applications in electronic sensors, data storage, optoelectronic and photonics. Such e-textiles have found use in diverse commercial sectors such as sport, protective clothing, healthcare and technical purposes [ 1 ]. This has often involved electronic components and circuit boards being attached to the textile, but this inevitably leads to a change in the feel and drape of a textile and increases its mass.…”

“…In another approach, Cho et al used polyurethane-sealing onto Cu/Ni electroless plated polyester fabric for e-textiles [ 7 ]. Govaert and Vanneste employed several techniques to protect a conductive layer consisting of carbon nanotubes i.e., direct coating, transfer coating and screen printing, for the application of water based polyacrylate binder [ 1 ]. To improve wear durability and adhesion at the interface between Cu film and PES fabric, Jiang et al treated the Cu-coated polyester fabric with two commercial solutions of polyester-polyurethane and aqueous acrylate in different concentrations, which also showed advantages in the resistance to aging [ 17 ].…”

Flexible Antennas: A Review

“…Further, low glass transition temperatures of polymer make them unusable in high-temperature applications. Ceramic substrates can be an alternative which can withstand high temperature and can be used in flexible applications [ 247 ].…”

Conductive, antibacterial, and electromagnetic shielding silver‐plated cotton fabrics activated by dopamine

“…With the rapid development of technology in the textile industry, conventional textiles have been unable to meet peoples' demand for the functionality like antibacterial, shielding effectiveness, and conductivity . Hence, textiles with high quality of multifunction have attracted a large number of researchers' attention due to large potential for new applications and market demand .…”