Preparation and performance of non-sintered lightweight aggregates derived from textile sludge and coal fly ash

Abstract

The feasibility of preparing non-sintered lightweight aggregate using textile sludge and coal fly ash as the main raw materials was investigated. Extensive experiments were conducted to analyze the effects of different coal fly ash/sludge ratio, sodium silicate addition and curing time on the performance of non-sintered lightweight aggregates (NSLWAs). The optimal preparation parameters were determined as follows: coal fly ash/cement ratio of 2.2, textile sludge addition of 20%, sodium silicate addition of 10%, and curing time of 28 days. Under these optimal preparation conditions, the cylindrical compressive strength of NSLWAs was relatively high. The test results of Zn leaching toxicity test and S content all met the relevant standards and environmental safety requirements. NSLWA has a dense internal structure with uniformly distributed grains. By analyzing the hydration reaction mechanism during the NSLWAs preparation, it can be obtained that part of Zn<sup>2+</sup> was stabilized by conversion into insoluble Ca(Zn(OH)<sub>3</sub>)<sub>2</sub>･2H<sub>2</sub>O, while the remaining part was solidified and stabilized through encapsulation and adsorption of hydration products. Furthermore, it was discovered that pozzolanic admixtures played a crucial role in the hydration and hardening process of NSLWAs, and the presence of C-S-H gel and Mullite contributed to the increase in cylinder compressive strength of NSLWAs.