Preparation and properties of high-temperature resistant bisphthalonitrile resins containing trifluoromethyl groups reinforced by poly (aryl ether nitrile) capped by phthalonitrile and their composites

Abstract

A new series of high-temperature resistant bisphthalonitrile resins containing trifluoromethyl groups were prepared based on 4,4’-(hexafluoroisopropylidene) bisphthalonitrile (BFPh), which was toughened by hexafluoroisopropylidene-containing poly (aryl ether nitrile) oligomer capped by phthalonitrile (FPEN-Ph) in the different content. In addition, glass fiber reinforced composites were prepared by hot pressing process. The structure of the oligomer was characterized by FTIR and 1HNMR. The curing behavior of the blends was studied by DSC. Thermal stability and mechanical properties were also studied. The results showed that the introduction of appropriate content of FPEN-Ph could improve the reactivity of the curing reaction. TGA and DMA results showed that the cured polymers and composites had excellent thermal properties. The residual mass of FPEN-Ph content of 10% at 800°C was 72.4%, and the 5% thermal degradation temperature (T5%) under inert atmosphere was 530°C. The flexural strength of glass fiber reinforced composites was about 592.7 MPa, and the shear strength was about 61.6 MPa, showing excellent mechanical properties. The high-tech thermosetting resin was toughened and enhanced at the same time without reducing heat resistance.