Preparation of a Polycarboxylate Superplasticizer with Different Monomer Regulations and Its Effect on Fluidity, Rheology, and Strength of Cement

Abstract

Polycarboxylate superplasticizers (PCEs) are indispensable functional ingredients in modern construction, and their usage is extensive. Herein, a polyether macromonomer (VPEG) with high reactivity was used to prepare VAPCEs with different interfacial adsorption properties (acid−ether ratio) at low temperatures and reacted in 30 min. The effects of various VAPCEs on the fluidity, rheology, and strength of cement were investigated with a w/c (water/ cement) ratio of 0.35. Results showed that VAPCE-3 (acid−ether ratio is 3) exhibited the best dispersion, and the fluidity of cement slurry with VAPCE-3 (280 mm) is 278.38% higher than that of the control sample (74 mm). The reason is summarized as VAPCE-3 having good adsorption performance on the surface of cement particles and having a large steric hindrance between particles. The compressive strength of cement with VAPCE-3 was enhanced by 8.29% compared with pure cement in 3 days of curing age due to its densification on microstructure and lowest R orientation index of calcium hydroxide. With the amount of acrylic acid in VAPCE increasing, the flexural strength enhanced because a more cross-linking network was formed with Ca 2+ in cement with the increase of COO − content in VAPCEs.