Process analytical approaches for the coil-to-globule transition of poly(N-isopropylacrylamide) in a concentrated aqueous suspension

Abstract

The coil-to-globule transition of poly(N-isopropylacrylamide) (PNIPAM) microgel particles suspended in water has been investigated in situ as a function of heating and cooling rate with four optical process analytical technologies (PAT), sensitive to structural changes of the polymer. Photon Density Wave (PDW) spectroscopy, Focused Beam Reflectance Measurements (FBRM), turbidity measurements, and Particle Vision Microscope (PVM) measurements are found to be powerful tools for the monitoring of the temperature-dependent transition of such thermo-responsive polymers. These in-line technologies allow for monitoring of either the reduced scattering coefficient and the absorption coefficient, the chord length distribution, the reflected intensities, or the relative backscatter index via in-process imaging, respectively. Varying heating and cooling rates result in rate-dependent lower critical solution temperatures (LCST), with different impact of cooling and heating. Particularly, the data obtained by PDW spectroscopy can be used to estimate the thermodynamic transition temperature of PNIPAM for infinitesimal heating or cooling rates. In addition, an inverse hysteresis and a reversible building of micrometer-sized agglomerates are observed for the PNIPAM transition process.Electronic supplementary materialThe online version of this article (doi:10.1007/s00216-016-0050-7) contains supplementary material, which is available to authorized users.

Bottom, Top, or in Between: Combining Plasmonic Nanohole Arrays and Hydrogel Microgels for Optical Fiber Sensor Applications

“…PolyNIPAM microgels show a complex behavior upon swelling and collapse based on their internal structure. Similar observations, that is, a certain drop in the measurement signal above the VPTT, were already published for polyNIPAM-co-methacrylic acid microgel dispersions [42] as well as polyNIPAM microgel dispersions, [43] and related to inter-particle steric compression and intra-microgel physical interactions or to the formation of µm sized agglomerates, respectively. In addition, other analytical methods have reported unusual signals for this temperature range, which might offer a more detailed explanation.…”

Effective Separation of High-Ash Fine Coal Using Water Containing Positively Charged Nanobubbles and Polyaluminum Chloride

“…For each test, the beaker with the corresponding coal slurry was placed on a lifting platform with agitation (600 rpm), and the PVM probe was immersed in approximately two-thirds of the height of the dispersion . During testing, enlarged images of the observed field were transmitted to the computer in real time for 13 min, and the relative backscatter index (RBI) of each image was calculated by the iC PVM software . RBI is defined as RBI decreases as the particles get finer and as the concentration of particles increases, i.e., image brightness decreases.…”

“…17 During testing, enlarged images of the observed field were transmitted to the computer in real time for 13 min, and the relative backscatter index (RBI) of each image was calculated by the iC PVM software. 18 RBI is defined as 19 RBI image brightness/intensity of light input =…”

Monitoring Lactose Crystallization at Industrially Relevant Concentrations by Photon Density Wave Spectroscopy

“…It represents an area‐based turbidity signal, which is derived from the microscopic images and describes the relationship between the detected and the incident light. Further details about the measurement principle can be found elsewhere .…”