Production of fuel by co-pyrolysis of Makarwal coal and waste polypropylene through a hybrid heating system of convection and microwaves

Abstract

Summary The bituminous coal of the Makarwal range of Pakistan and waste polypropylene were converted into gaseous and liquid fuel using a hybrid heating process based on microwave metal interactions. The mixture of coal and polypropylene was heated by the volumetric heating generated by absorption of the microwaves and the conventional heating produced by the sparking of copper under microwave power in a domestic microwave oven. The heat generation capacity and range of sparking of copper were increased by the use of tightly coiled copper antenna. The heat generation efficiency of copper antenna was found to vary with variation in the shape of the copper antenna. Four types of antenna were used in the pyrolysis process, i.e. the antenna made of tightly coiled copper, copper mesh antenna, copper strips antenna and copper cylinder antenna. It was observed that copper coil and copper mesh antenna were more efficient and responsible for higher percent conversions while the multi‐strip antenna was next and the least percent conversion was observed for single strip cylinder of copper. The amount of products and the relative concentrations of the oil, wax and gases were observed to vary with variations in the relative amount of coal and polymers. Both the gaseous product and aqueous fraction were analysed for sulphides using lead acetate reagent. The gases were also analysed for the presence of alkynes and alkenes using aqueous solutions of copper‐I chloride and potassium permanganate respectively. The oily product which was composed of oil and wax was analysed by GC‐FID and GC‐MS analyses. Copyright © 2016 John Wiley & Sons, Ltd.

Catalytic co‐pyrolysis of waste rubber and waste lubricants with waste copper catalyst into value‐added fuel

“…If two or more different materials are pyrolyzed together, the process is referred to as co-pyrolysis, 10 for example, coal and polypropylene have been co-pyrolyzed in the presence of copper which resulted in 72% conversion of raw material and greatly affected the composition of pyrolysis oil. 19 The copyrolysis of waste biomass and polyethylene in the presence of waste iron dust and CaCO 3 has been studied that resulted in a greater yield of pyrolysis oil than the noncatalytic process. 10 The literature reveals that to obtain better fuel and achieve a greater conversion, catalytic pyrolysis and co-pyrolysis of waste materials have proven to be efficient processes.…”

A review on conversion techniques of liquid fuel from waste plastic materials

“…The total conversion was obtained up to 72% within 22 min through microwave heating. The gas yield was 0.5% of the total mass with the presence of olefins and oil composed with 47.35% of oxygenated aromatic components in addition to long‐chain ketones, alcohols, and alkenes .…”

Modeling the prediction of hydrogen production by co‐gasification of plastic and rubber wastes using machine learning algorithms

“…3 Innovative technologies such as pyrolysis and gasification have been proposed as a means of utilizing plastic wastes for the production of fuel and value-added chemicals. [4][5][6][7][8][9][10] Both the pyrolysis and gasification processes employ thermal energy to convert waste plastic materials to liquid fuel and hydrogen-rich syngas without combustion. 3,5 The amount of gasifying agent (oxygen or steam) during the gasification process is often controlled.…”

“…Rather than promoting the policy of outright banning waste plastics, researchers have agitated for sustainable utilization of waste plastics for the production of green fuel and chemicals 3 . Innovative technologies such as pyrolysis and gasification have been proposed as a means of utilizing plastic wastes for the production of fuel and value‐added chemicals 4‐10 . Both the pyrolysis and gasification processes employ thermal energy to convert waste plastic materials to liquid fuel and hydrogen‐rich syngas without combustion 3,5 .…”