Progress in waste oil to sustainable energy, with emphasis on pyrolysis techniques

Abstract

a b s t r a c tThis paper begins with a review on the current techniques used for the treatment and recovery of waste oil, which is then followed by an extensive review of the recent achievements in the sustainable development and utilization of pyrolysis techniques in energy recovery from waste oils. The advantages and limitations shown by the use of pyrolysis technique and other current techniques were discussed along with the future research that can be performed on the pyrolysis of waste oil. It was revealed that the current techniques (transesterification, hydrotreating, gasification, solvent extraction, and membrane technology) are yet to be sustainable or completely feasible for waste oil treatment and recovery. It was established that pyrolysis techniques offer a number of advantages over other existing techniques in recovering both the energetic and chemical value of waste oil by generating potentially useful pyrolysis products suitable for future reuse. In particular, microwave pyrolysis shows a distinct advantage in providing a rapid and energy-efficient heating compared to conventional pyrolysis techniques, and thus facilitating increased production rates. It was found that microwave pyrolysis of waste oil showed good performance with respect to product yield, reaction time, energy consumption, and product quality, and thus showing exceptional promise as a sustainable means for energy recovery from waste oils. Nevertheless, it was revealed that some important characteristics of the pyrolysis process have yet to be fully investigated. It was thus concluded that more studies are needed to extend existing understanding in the optimal reaction and process parameters in order to develop the pyrolysis technology to be a sustainable and commercially viable route for energy recovery from problematic waste oils.

Self‐purging microwave pyrolysis: an innovative approach to convert oil palm shell into carbon‐rich biochar for methylene blue adsorption

“…Biochar can be produced via pyrolysis of a variety of lignocellulose materials such as coconut shell, palm kernel shell, fruit peel, or rice straw . In particular, microwave pyrolysis is becoming a popular pyrolysis approach to produce biochar or activated carbon due to its several distinct advantages . Microwave radiation can provide a rapid and targeted heating effect to the material .…”

Optimization of Biodiesel Production using a Stirred Packed-bed Reactor

“…Besides that, enhancement in the rate of reaction and the yield can also be facilitated through the use of a catalyst. Unlike conventional heating, this method can operate at over 90% efficiency and is ecofriendly in a variety of chemical reactions (Lam et al, 2016).…”

Oil sludge recycling by ash-catalyzed pyrolysis-reforming processes

“…Significantly, the deactivated catalysts could be much easier renewed and regenerated. So far, many types of catalysts have been used for the catalytic pyrolysis of oily wastes [20][21][22][23][24]. Lam et al [21] also found that the metallic pyrolysis char could be used for waste engine oil upgrading by catalytic microwave pyrolysis.…”