Real-Time Detection of Slug Velocity in Microchannels

Abstract

Microfluidics processes play a central role in the design of portable devices for biological and chemical samples analysis. The bottleneck in this technological evolution is the lack of low cost detection systems and control strategies easily adaptable in different operative conditions, able to guarantee the processes reproducibility and reliability, and suitable for on-chip applications. In this work, a methodology for velocity detection of two-phase flow is presented in microchannels. The approach presented is based on a low-cost optical signals monitoring setup. The slug flow generated by the interaction of two immiscible fluids {air and water} in two microchannels was investigated. To verify the reliability of the detection systems, the flow nonlinearity was enhanced by using curved geometries and microchannel diameter greater than 100 μ m. The optical signals were analyzed by using an approach in a time domain, to extract the slug velocity, and one in the frequency domain, to compute the slug frequency. It was possible to distinguish the water and air slugs velocity and frequency. A relation between these two parameters was also numerically established. The results obtained represent an important step in the design of non-invasive, low-cost portable systems for micro-flow analysis, in order to prove that the developed methodology was implemented to realize a platform, easy to be integrated in a System-on-a-Chip, for the real-time slug flow velocity detection. The platform performances were successfully validated in different operative conditions.

Fluid–Structure Coupling Effects in a Dual U-Tube Coriolis Mass Flow Meter

“…An important issue is that the mixed fluids of gas and liquid, the so-called two-phase flow, will cause the measurement errors of a CMF. Recently, Gagliano et al [ 12 ] have proposed a methodology for velocity measurement of tow-phase flow in microchannels based on a low-cost optical signals monitoring setup. This provided the feasibility for CMF to overcome the problem of measuring the two-phase flow.…”

Automatic Sorting System for Rigid Piezoelectric Transducer Wafers Used in Displacement Adjustment

“…In fact, our system has the characteristics of micro-operation, and even the design idea and main structure of our system can be transferred to a micro-operation just like the experimental setup in [ 18 , 19 ] after an appropriate improvement.…”

“…Therefore, laser interferometry is mainly used in the laboratory for small batch and high precision measurement tasks. The digital image correlation (DIC) method is widely used in the field of micro-operation/microfluidics systems [ 18 , 19 ] and is also applied to measure piezoelectric strain coefficients [ 20 ]. For the DIC method, the test surface should have a unique pattern for subset tracking to identify the subsets from each other.…”

Automated Surface Defect Inspection Based on Autoencoders and Fully Convolutional Neural Networks

“…The proposed technique provides higher flexibility and better accuracy for defect detection. Furthermore, the technique may also be beneficial for other detection applications such as slug velocity detection in microchannels [21].…”