Real-Time Mode Switching and Beam Scanning of High-Gain OAM Waves Using a 1-Bit Reconfigurable Reflectarray Antenna

Abstract

A reconfigurable electromagnetic surface has been studied to realize the adjustable orbital angular momentum (OAM) beams for real-time wireless communication and dynamic target detection in the future. OAM mode switching realized by many previous designs suffers from low gains without OAM beam scanning. In this article, a 1-bit reconfigurable reflectarray antenna is designed, fabricated, and tested for the real-time control of OAM mode switching and large-angle vortex beam scanning in three-dimensional space. The proposed reflectarray surface is composed of 1-bit electronically reconfigurable cells, and the size is 24 λ × 24 λ with 2304 units. The reconfigurable element is designed by using a radiation patch loading a PIN diode with effective control of two states, “ON” and “OFF”, for the demand of 180° phase difference. The reflectarray surface can be assigned to a code sequence of 0 or 1 by the Field-Programmable Gate Array (FPGA) in real time. Henceforth, the coding surface can dynamically control the generation of high-gain OAM beams, where only the optimized phase distributions on the surface need to be changed according to demand. To verify the concept, a large-scale reflectarray surface is fabricated and measured with an oblique feed at 15°. Different OAM-carrying phase distributions for different OAM beam states are calculated and tested. The test results show that the OAM mode switching between l = 1 and l = 2 is realized, and other variable modes such as l = 3 or l = 5 can also be achieved by modifying the phase encoding sequence. Furthermore, the direction of the vortex beams can be accurately controlled with gains over 20 dBi, and the large-angle vortex beam scanning is verified. Therefore, all results demonstrate that the proposed 1-bit reconfigurable reflectarray is efficient for the regulation and control of OAM-carrying beams for the demand of real-time dynamic wireless communications in the future.

IoT Sensor Network Using ESPAR Antenna Based on Beam Scanning Method for Direction Finding

“…Beam steering can be accomplished with the help of the mechanical BS because it is the prior process of SBS of the ESPAR array of ESPAR antennas. Only after fixing the position of the tags, can the SBS capture the information signal [ 45 , 46 , 47 ]. Therefore, the purpose of this research article is to determine a sensor networking system with low power consumption that can communicate over distances and find the exact location of the data signal source.…”

Gain and mode purity filtering dual polarized OAM beam generation using cavity waveguide-based 3D transmitarray

“…The OAM mode of the antennas is ±1 to make a fair comparison of gains. For the RA based designs [24,50,51], to avoid blockage of the sources, the beam directions of the RAs are steered off the broadside. Hence, the aperture efficiency of RA based OAM antennas is relatively limited compared with the proposed design.…”

Beam-Scanning Orbital Angular Momentum Circular Leaky-Wave Antenna With a Half-Mode Corrugated Substrate Integrated Waveguide

“…It can also be used to detect multiple targets simultaneously [1], [4] as well as angular velocity, radius and tilt angle of rotating objects [5]- [7]. It can also increase the channel capacity within a communication network with theoretically infinite number of channels based on different OAM modes [8], [9].…”