Realtime tracking in five degrees of freedom using two writs-mounted laser range finders

Abstract

The results of experiments in realtime tracking of moving objects using wrist-mounted sensors are presented. Two laser range finders are mounted orthogonal to each other on the wrist of a six-degree-of-freedom PUMA robot. The objective is to have the robot end-effector maintain a constant position and orientation with respect to a flat object moving in three-dimensional space in the field of view of the range finders. Sensory feedback from the range finders is used to servo the robot such that its trajectory is similar to that of the moving object in five degrees of freedom. The algorithms for this application are implemented in C and run on four Motorola MC68020 processors with the Harmony** operating system. Tracking is done with maximum linear and angular speeds of the target object being 25 cm/s and 0.5 rads, respectively. The robot is capable of maintaining the required pose with respect to the object at these speeds with a small lag due mostly to data collection time. The acceleratiorddeceleration and the maximum speed of the robot trajectory are varied depending on the speed of the moving object being tracked to yield different tracking behaviours. A performance study of the tracking experiment is presented.

Using a 3d Time-of-Flight Range Camera for Visual Tracking

“…Depth is calculated by triangulation and therefore careful calibration is needed. In (Venkatesan and Archibald, 1990) an approach for a tracking system of moving objects is presented, that is similar to the set-up described in this paper. Two laser range profile scanners, fixed at the manipulator end-effector, measure the distance to the object to be tracked.…”

Visual Control of Robot Manipulators – A Review

“…83 The latter lays a bead at 400mm/s with respect to a moving car-body, and shows a closed-loop bandwidth of 4.5Hz. More recently Venkatesan and Archibald 96 describes the use of two hand-held laser scanners for real-time 5DOF robot control.…”

“…Such sensors usually determine depth along a single stripe of light, multiple stripes or a dense grid of points. If the sensor is small and mounted on the robot 3,96,30 the depth and orientation information can be used for servoing. Besl 14 provides a comprehensive survey which includes the operation and capability of many commercial active range sensors.…”

Performance benefits of telerobotics and teleoperation - enhancements for an arm-based tank waste retrieval system

“…waste processing operations) with commercial hardware (Harwell stereoscopic vision system) coupled with an adaptive controls algorithm. Other experiments have been completed using laser range finders as the sensory feedback device (Venkatesan and Archibald, 1990). The advantages of end point tracking are to be able to track action occurring a t the end of the telerobotic arm or the end effector.…”