The increase in urbanization has led governments to build on sites with certain geotechnical hazards, such as liquefaction, low bearing capacity, etc. In recent decades, as governments have focused their efforts on the environmental and economic aspects, researchers have emphasized the need to use suitable alternative materials for the best design features, also the issue of plastic pollution is a significant global problem that requires urgent attention, current initiatives focus on the use of technical solutions to integrate non-biodegradable plastics into the construction of buildings and road pavement. In this paper, a series of direct shear tests were performed to evaluate the benefits of plastic wastes, such as polypropylene (PP) pots, and the engineering properties of sand reinforced with such materials. To highlight the contribution of the reinforcement to the shear strength, the tests were carried out on sand reinforced with variable fibre contents (0.2, 0.4, 0.6, and 0.8%) for loose-density sand and medium-density sand. The experimental results showed that the increase in shear strength is relatively more significant for specimens prepared with dry deposition mode as compared to those prepared with wet deposition mode and it is increased with the fibre content. The inclusion of randomly distributed fibres has a significant effect on the shear strength and dilatation of sandy soils. Furthermore, the recycling fibre used in this study shows a better performance in terms of shear strength. In conclusion, the use of plastic waste as reinforcement would lead to at least two solutions: soil reinforcement and reducing the environmental impact of waste.