Relative humidity measurements of a thin-film humidity sensor in condensing conditions in the temperature range from −40 °C to 5 °C

Abstract

In condensing conditions, metastable states such as supersaturation of water vapour and supercooling of liquid water are commonly observed in the free atmosphere. This study investigates the response of a polymeric thin-film humidity sensor under condensing conditions at various temperatures (-40 °C, -20 °C, -5 °C, and 5 °C) and different relative humidity (RH) levels. To ensure precise control of RH, a saturator-based humidity generator operating in a two-temperature mode is utilized. The condensing conditions are achieved in two ways: by increasing water vapour pressure (WVP) at a fixed temperature and by decreasing the temperature while maintaining a constant WVP. In general, when measuring RH under condensing conditions, the sensor indicates a temporary supersaturation state with an RH peak exceeding 100% before the onset of condensation. Subsequently, the RH value exhibits a delayed decrease when exposed to a non-condensing RH level. The experiments with a constant WVP demonstrate a lower likelihood of ice condensation compared to those with a constant temperature. This study demonstrates the measurement capability and behaviour of thin-film humidity sensors above 100% RH in the supersaturation states that are commonly observed in the free atmosphere at meteorologically-relevant temperatures.