Reliability analysis on resonance for low-pressure compressor rotor blade based on least squares support vector machine with leave-one-out cross-validation

Abstract

This research article analyzes the resonant reliability at the rotating speed of 6150.0 r/min for low-pressure compressor rotor blade. The aim is to improve the computational efficiency of reliability analysis. This study applies least squares support vector machine to predict the natural frequencies of the low-pressure compressor rotor blade considered. To build a more stable and reliable least squares support vector machine model, leave-one-out cross-validation is introduced to search for the optimal parameters of least squares support vector machine. Least squares support vector machine with leave-one-out cross-validation is presented to analyze the resonant reliability. Additionally, the modal analysis at the rotating speed of 6150.0 r/min for the rotor blade is considered as a tandem system to simplify the analysis and design process, and the randomness of influence factors on frequencies, such as material properties, structural dimension, and operating condition, is taken into consideration. Back-propagation neural network is compared to verify the proposed approach based on the same training and testing sets as least squares support vector machine with leave-one-out crossvalidation. Finally, the statistical results prove that the proposed approach is considered to be effective and feasible and can be applied to structural reliability analysis.

Recent advances in reliability analysis of aeroengine rotor system: a review

“…Compared with the direct MCS method, the surrogate model requires fewer samples and holds lower time consumptions (Zhang et al, 2016). Current surrogate model methods include polynomial function (Meng et al, 2019b(Meng et al, , 2020a, Kriging model (Huang et al, 2020;Zhang et al, 2015Zhang et al, , 2020b, support vector machine (Hurtado, 2007;Gao and Bai, 2015;Dai et al, 2012) and artificial neural network (Song et al, 2018;Barbosa et al, 2020;Liu et al, 2019a).…”

Fatigue strength reliability assessment of turbo-fan blades by Kriging-based distributed collaborative response surface method

“…The harmonics frequency depends on the rotational speed: n • E =n • ω /60, where n is the engine order. Also, the intersection between the nth engine order line and the line of natural frequencies of a mode is possible resonance point [8,9].…”