Reliability-Centered Maintenance Scheduling of Photovoltaic Components According to Failure Effects

Abstract

In the power distribution system of South Korea, the sectionalizer minimizes and recovers the system from failures, and prohibits independent operation of distributed energy resources. Therefore, it is difficult to expect reliability improvements owing to a photovoltaic system in the power distribution system. Herein, we propose a reliability-centered maintenance-scheduling method based on an economic analysis of photovoltaic integration facilities to ensure the economic feasibility of the photovoltaic system operator and the reliability of the power distribution system. Photovoltaic integration facilities are divided into two categories based on their spread of the failure, and the maintenance scheduling is evaluated according to the maximum and minimum losses according to the time of failure. Facilities that cause power outages to photovoltaics and to loads have relatively little effect on the time of failure. This is because the effects of the power outages in the loads predominate. In contrast, facilities that only cause photovoltaic outages are affected by the generation time. In particular, insulated gate bipolar transistors that operate only during photovoltaic generation have been found to be more economical for corrective replacement than preventive replacement.

MVDC MMC Redundancy Design Based on Availability and Cost Considering Submodule Degradation

“…If the MMC arm has a mean time to failure (MTTF), the arm's failure rate is calculated according to (18) [10]. In the case of a single SM failure rate, it is calculated according to (19) [30]. For the comparison of failure rates, one case from the case studies presented in this study is selected.…”

“…The expected cost of power outage within the evaluation period is calculated by accumulating the annual EENS and multiplying it by the CDF. The CDF was assumed to be €3,120 per MWh, applying the unit cost of power outages in Spain [30]. Table 8 presents a comparison of the cost of power outage damages over a 20-y period.…”

Cake Breaker Conveyor Machine Maintenance System Analysis Using the Reliability-Centered Maintenance (RCM) Method

“…This study proposes a machine maintenance system using the Reliability Centered Maintenance (RCM) method [4]. The RCM method is expected to determine the maintenance schedule and the exact maintenance activities that must be carried out on each critical component of the Cake Breaker Conveyor [5]- [8].…”