Removal of Solids from Palm Oil Mill Effluent and Paint Wastewater Using Electrocoagulation Technique

Abstract

Electrocoagulation has been employed as a treatment technique for treating various wastewaters. This study focuses on the performance of electrocoagulation process for the treatment of Palm Oil Mill Effluent (POME) and Paint Wastewater (PW) using iron electrodes. POME obtained from local palm oil producers and PW from a paint industry, both in Enugu state of Nigeria, were treated by electrocoagulation using two iron electrodes. Effects of current density, electrocoagulation time, pH, and temperature were studied. Results revealed that this process could reduce the concentration of Total Suspended and Dissolved Solids (TSDP), in both POME and PW. The highest removal efficiencies of 65% and 76% were obtained for POME and PW, respectively, at 3 Amps, 60min, pH of 10, and 50°C for POME and 3 Amps, 60min, pH of 6, and 60°C for PW. Of the two kinetic models studied, second-order kinetic model fitted best to the obtained experimental kinetic data. From this study, it can be concluded that electrocoagulation is effective in the treatment of POME and PW.

A Brief Review of Physico-Chemical Treatment Techniques for Palm Oil Mill Effluent (POME)

“…Nwabanne et al [24] evaluated the effectiveness of electrocoagulation with iron electrodes in removal of total dissolved suspended particles. They reported that under optimum operation conditions at current density of 3 Amps, electrocoagulation time of 60 min, pH of 10, and temperature of 50°C, 65% removal of total dissolved suspended particles was obtained.…”